DeatschWerks Mustang DW400 Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Водяной насос DeatschWerks Mustang DW400. DeatschWerks Mustang DW400 3 страницы. 2014-2018 general motors truck fuel pump module
Также для DeatschWerks Mustang DW400: Руководство по установке (6 страниц), Руководство по установке (3 страниц)

Печатать страницу

DeatschWerks

DW400 Pump Installation Guide

1 – Depending on the year of your vehicle there are two different wiring placements for the pump ground wire

and level sensor wire. The harness provided should have the brown and blue wire de-pinned. If your vehicle

is 2006-2016 the Red and Brown wires should be next to each other. If you have a 2017+ vehicle the blue wire

should be next to the Red wire. The black plastic connector has labels for each wire 1-4 use the chart below to

double check.

Note: if your pump does not prime and run when the key is turned, revisit this step and reverse the wires to the opposite

year range.

2006-2016

2017+

2 – Install the fuel level sensor into the bucket, install the wiring harness onto the DW400 fuel pump and the

module top hat, then install the top hat onto the bucket assembly.

For additional technical support please contact us at:

[email protected]

or 405.233.3991