Gamma Borealis R Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Осветительное оборудование Gamma Borealis R. Gamma Borealis R 20 страниц. Led moving wash/beam
Печатать страницу
DMX Wiring
DMX works by connecting 1 or multiple lights to the output of a DMX lighting console or
software with a DMX interface.
DMX lights connect in what is called a "daisy-chain". Your first DMX cable will plug it's
male DMX connector into the female DMX connector on your lighting console. The re-
maining female connector will then connect to the DMX input on your first light.
You may then connect your next fixture to the output of your first light, and continue the
chain.
32 Fixture Rule – DMX only allows you to connect up to 32 fixtures in a single daisy
chain for signal strength. Sometimes, depending on the fixtures and cable length, this
number is less (or more).
DMX Cables can be 3-pin or 5-pin. These use the same type of data, and in the 5-pin
only pins 1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at
least 110 ohms resitance. Microphone cable is not DMX cable.
Borealis R – GAMMA LED Vision
Page 8 of 20