Gamma Rose XT LED 200 Zoom Инструкция пользователя - Страница 6
Просмотреть онлайн или скачать pdf Инструкция пользователя для Осветительное оборудование Gamma Rose XT LED 200 Zoom. Gamma Rose XT LED 200 Zoom 7 страниц.
Печатать страницу
3-Pin to 5-Pin Conversion Chart:
Note!
If you use a controller with a 5 pin DMX output connector,you will need to use a 5 pin to 3
pin adapter. The chart below details a proper cable conversion:
Conductor
Ground/Shield
Data(-) signal
Data(+) signal
Not Used
Not Used
Setting up a DMX Serial Data Link:
Master/Slave Fixture Linking:
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin
connector of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector.
Then, proceed to connect from the output as stated above to the input of the following fixture
and so on.
4. DMX Channels Summary
4.1 Operation method
3-Pin to 5-Pin Conversion
3 Pin Female(Output)
Pin 1
Pin 2
Pin 3
5 Pin Male(Input)
Pin 1
Pin 2
Pin 3
Do not use
Do not use
Led Par Light