Gamma X-Stringer XLT Руководство пользователя - Страница 17
Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Gamma X-Stringer XLT. Gamma X-Stringer XLT 20 страниц. Electronic stringing machine
Печатать страницу
TROUBLESHOOTING TIPS
PROBLEM
String slips in clamps
String slips in gripper
String clamp base slips on turntable
Electrical system does not function
String tension too tight or too loose
With time and use, the clamping surfaces of your machine may become oily or dirty and result
in string or clamp slippage while stringing. Periodic cleaning of the String Clamps, String Clamp
Base and String Gripper is recommended. Knife sharpening stones work well for cleaning the
diamond coated string clamping surfaces. Cleaning with a solvent such as isopropyl alcohol
and a mild abrasive tool such as a toothbrush also works well to remove oily or greasy build up.
- Adjust gap between clamp jaws
- Clean clamp jaws
- Clean gripper jaws
- Make sure string is wrapped over top gripper
prior to inserting between gripper jaws
- Clean bottom of clamp & top of turntable with
alcohol
- Adjust clamp base locking nut
- Check power source
- Check power cord connections
- Check tension using a tension calibrator,
adjust machine calibration if necessary
CARE & CLEANING
17
SOLUTION