Gamma Led Vision Starburst Versa Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для DJ оборудование Gamma Led Vision Starburst Versa. Gamma Led Vision Starburst Versa 18 страниц. 18x30w rgbwa+uv (6in1)
Печатать страницуDMX Cables can be 3-pin or 5-pin. These use the same type of data, and in the 5-pin only pins
1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms
resistance. Microphone cable is not DMX cable.
Please refer to the diagram below:
For installations where the DMX cable has to run a long distance or is in an electrically noisy
environment, it is recommended to use a DMX terminator. This helps in preventing corruption
of the digital control signal by electrical noise and reflections. The DMX terminator is simply an
XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into
the output XLR socket of the last fixture in the chain. Please see illustrations below:
SS