Decofire Halo Series Инструкции по монтажу, безопасности и эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Инструкции по монтажу, безопасности и эксплуатации для Нагреватель Decofire Halo Series. Decofire Halo Series 17 страниц. Rapid reduction area heater
Печатать страницу
Step 9.
Attach the 3 safety guards (F) onto the hooks at
the top of the upper frame supports (I).
Step 11.
Connect the appliance hose and regulator to the gas cylinder.
Note: POL fitting connectors are left hand threaded and must be
turned anti clockwise to connect.
Tighten the POL regulator connection by hand (only) making sure it is
fastened securely before moving on to the lighting and operating steps
in this manual.
Turn anti-clockwise
to connect
Regulator
Page 10
F
Cylinder
Valve
Step 10.
Open the door on the cylinder housing (D) and place
the gas cylinder (not included) into the pre-assembled
cylinder support. Tighten the support strap to ensure
the gas cylinder is fully secure. Note: Once the cylinder
is connected to the regulator in the next step, be sure to
close the door prior to use.
D