Decofire Halo Series 조립, 안전 및 작동 지침 - 페이지 10

{카테고리_이름} Decofire Halo Series에 대한 조립, 안전 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Decofire Halo Series 17 페이지. Rapid reduction area heater

Step 9.

Attach the 3 safety guards (F) onto the hooks at

the top of the upper frame supports (I).

Step 11.

Connect the appliance hose and regulator to the gas cylinder.

Note: POL fitting connectors are left hand threaded and must be

turned anti clockwise to connect.

Tighten the POL regulator connection by hand (only) making sure it is

fastened securely before moving on to the lighting and operating steps

in this manual.

Turn anti-clockwise

to connect

Regulator

Page 10

Cylinder

Valve

Step 10.

Open the door on the cylinder housing (D) and place

the gas cylinder (not included) into the pre-assembled

cylinder support. Tighten the support strap to ensure

the gas cylinder is fully secure. Note: Once the cylinder

is connected to the regulator in the next step, be sure to

close the door prior to use.