Bernal S 201-60 Руководство по эксплуатации - Страница 14

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Открыватель двери гаража Bernal S 201-60. Bernal S 201-60 17 страниц. S 201 series

SAFETY CHECK

Before termination of the start up you need to

do a safety check to see if the opener stops

and reverses correctly according to the EU

norms (EN 12453) when hitting an obstacle (max. force

= 150 N which corresponds to 15 kg, above an opening

of 50 mm). This check is necessary for security of

persons and objects. This security check and force

measurement may only be done by a professional. At

obstacle detection the door has to stop and reverse. If

the door does not run the desired path or if the door

does not reverse at obstacle detection, the force and

path programming procedure needs to be repeated. If

the force level at cut-off is either too low or too high,

you have to adjust the force accordingly via the digital

potentiometer. Then repeat the test.

If after these corrections the door still does not stop

and reverse according to the valid norms, the door

may not be operated with the garage door opener.

WARNINGS!

Please attach warnings visibly and close to the opener.

S 201

We recommend double check of the complete plant (door +

opener) by a professional once a year. Force cut-off, con-

nected safety devices and function of the mechanical

emergency lock need to be checked every 4 weeks. Even-

tually occurred errors must be corrected immediately by a

professional.

You can test the force cutoff by putting a piece of

wood (of min. 5 cm height) on the ground in the travel

range of the door (Fig. 27) and then close the door with

the GDO. When hitting the obstacle the door has to

stop and reverse.

Disconnect the operator before

opening the housing 230V ~!!!

and remove the light bulb.

Please only use max. 24V/15W (E14) light bulbs for

replacement purposes.

Batteries and light bulbs do not fall under warranty.

At dismounting and disposal the according local safety

and disposal regulations are to be followed.

ATTENTION

01-07