Gantner Q.brixx Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Измерительные приборы Gantner Q.brixx. Gantner Q.brixx 3 страницы.

.uick Start Guide: Q.brixx Assembly and Configuration Guide

Purpose: This guide will describe how to put together a Q.brixx system using a test controller (i.e.

Q.station or Q.gate) and the measurement modules. To disassemble or replace a module, simply reverse

the procedure.

Tools Required:

Torx T10 screw driver

2.5 mm hex key

Items Required:

Gantner test controller: Q.station or Q.gate.

Gantner measurement module: at least one measurement module.

Procedure:

1. Each controller and measurement module includes a base. Separate the base from the module

by removing the 2 x Torx T10 screws from the back of the base.

2. A controller in the brixx packaging comes with 2 x handles (a left side and a right side). Attach

the left side handle to controller's base.

3. Attach all the bases together moving from left to right. Secure the bases together using a 2.5

mm hex key (2 x screws):

Gantner Instruments Incorporated

9835 Carroll Centre Road, Suite 100

San Diego, CA 92126 USA

 www.gantnerinstruments.com

Toll Free: (877) 725-6997 (877 QBLOXXS)

Direct:

(858) 537-2060

Toll Free Fax: (800) 303-9381

Direct Fax:

(858) 537-2064