HIKVISION H1T Series Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION H1T Series. HIKVISION H1T Series 14 страниц. Turbo hd dome camera
Также для HIKVISION H1T Series: Руководство пользователя (15 страниц), Руководство пользователя (17 страниц), Руководство пользователя (17 страниц), Руководство пользователя (14 страниц), Руководство пользователя (14 страниц)

Figure 2-10 Disassemble the Camera

2. Pry the mounting base to remove the mounting

base from the camera body.

3. Paste the drill template (supplied) to the place

where you want to install the camera.

4. Drill the screw holes according to the drill template,

and the cable hole (optional) on the ceiling.

Note:

Drill the cable hole, when adopting the ceiling outlet to

route the cable.

5. Secure the mounting base to the ceiling with the

supplied screws.

Figure 2-12 Fix the Mounting Base to the Ceiling

Note:

In the supplied screw package, both self-tapping



screws and expansion bolts are contained.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

6. Route the cables through the cable hole, or the side

opening.

7. Secure the camera on the mounting base.

8. Connect the corresponding cables, such as power

cord, and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

1). Hold the camera body and rotate the enclosure

to adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

Figure 2-11 Drill Template

Figure 2-13 Secure the Camera

Clip Plate

Notch

Expansion Bolts

Fixing Screw