Ganz Lite LDB series Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Ganz Lite LDB series. Ganz Lite LDB series 2 страницы. 600 tvl day / night color camera

Печатать страницу

Precautions

Do not attempt to dismantle the camera module mounted

within the dome. There are no user serviceable parts within the

camera module. Refer servicing to qualified personnel.

Handle the camera with care. Do not abuse the camera.

Avoid striking or shaking it. Improper handling and storage

could damage the camera.

Do not operate the camera beyond its temperature,

humidity or power source rating. Please refer to the

environmental information provided overleaf.

Emissions

FCC COMPLIANCE: This equipment complies with Part 15 of

the FCC rules for intentional radiators and Class B digital devices

when installed and used in accordance with the instruction manual.

Following these rules provides reasonable protection against harmful

interference from equipment operated in a commercial area.

This equipment should not be installed in a residential area as

it can radiate radio frequency energy that could interfere with

radio communications, a situation the user would have to fix at their

own expense.

Install Methods

A. By using the base mounting holes

B. By using the quick install adaptor

Template

Surface mount (In a wall or ceiling)

Using Quick Install Adaptor:

Create an aperture in the mounting surface to a diameter of

Side Knock-out

1.5" (38mm) as indicated by "T2".

The aperture is also avaliable for cable access (3/4", 19mm).

Using screws:

Create four holes at template positions 'T1', use the screws

and plugs provided in the screw kit where the mounting

surface is appropriate.

When the cables are threaded through the mounting surface,

create an apture indicated "T2". It can be simply threaded for

use with the quick install adapter .

When mounting the dome on a surfce with the four T1 screws,

use one of the side knock-outs as indicated for cable entry

(see Installation Guide overleaf ).

Side Knock-out

Dome Base

PAN 360°

TILT 90°

Camera Module

ROTATE 360°

Camera Liner

Dome Cover

Side Knock-out

Cable Access

Side Knock-out

Preparation before installation

Use the template (see overleaf) to mark-out and prepare the mounting area.In

order to mount the base, first remove the camera module by gently pulling down

on the tabs that hold the camera module in place (see image right) and remove

camera assembly. To re-assemble gently pull down on the tabs and insert the

camera assembly.

Mounting Surface

Using the base mounting holes:

3/4"

Side

When mounting the dome to a ceiling or wall using screws, first knock out the screw

Knock-outs

Rubber Grommet

access holes that correspond to the template marks "T1".This can be done by using a

cross-point screwdriver.

Cable Notch

Push the cables through the dome base and 3/4" rubber grommet.

Install the grommet on the base to prevent dust ingress. Cables may be routed through

the mounting surface if an appropriate hole is made at location T2.

Mount with the Dome Base

If using the side knock-out, make sure the video-power cables are properly arranged in

the cable notch and exit out of the side knock without being crushed (see image A).

Video-Power Cables

Using the Quick Install Adaptor(Optional):

When mounting the dome to a ceiling using the quick install adaptor, use

1/2"Rubber Grommet

the template to cut a hole as the circle marked "T2" with a hole cutter.

Install the adaptor into the mounting surface and use the screws to adjust

the position of the two locking arms on the quick install adaptor to adjust

Mounting Surface

to the mounting surface.

Push the cables through the opening and 1/2"

rubber grommet. Make sure the grommet is

properly installed on the adaptor to prevent

dust ingress (see image B).

Mount with the Quick Install Adaptor

Mount on a US Single Gang Box:

3/4"

Rubber Grommet

When mounting the dome to the box, carefully remove the screws on the box.Install the 3/4"

grommet on the base to prevent dust ingress, then push the cables through the dome base

and 3/4" rubber grommet.

Mount the dome base on the box and reinstall the two screrws.

Tighten the screws sufficiently on the box (position T1, see image C).

Removing the dome cover and the camera liner

Gently turn the dome cover counter-clockwise to unlock and pull free of the dome base.

Dome Base

Remove the camera liner by gently pulling it free of the 4 notches in the camera base (see

US Single Gang Box

image A).

Opening the required knock-out panel

Open one of the side knock-outs (see image A) to the size required to allow cable entry.

Mount on a pre-installed US Single Gang Box

Mount the dome enclosure

By using the base mounting holes, the dome base can be fixed on the wall or

ceiling with attached screws.

Note: When using Quick Install Adaptor, re-assemble the parts of dome, then

mount the whole dome onto adaptor (see image B).

Install camera module

Push the video-power cables through the opening

Feed the pre-connected video-power cables through the appropriate point. Then push the

cable out of the opening. Make sure the cable is positioned on the proper location and

out of the side knock-out, if required.

Gimble

Adjust the camera position

Screw

To adjust the tilt angle, first loosen the 2 screws

on the gimble (See image right) make your

adjustments then retighten the screws.

The focus and range of the lens can be adjusted

(depending on the lens, see instructions

Gimble

overleaf).

Note: Do not attempt to adjust the camera position by holding the lens as this will cause

damage to the camera.

Make adjustments by tilting and rotating the gimble assembly.

PULL

Loosen the tab and pull out the camera assembly

Quick Install Adaptor

Locking Arms

Install Quick Install Adaptor on indoor ceiling

Install the camera liner

Carefully fit the camera liner over the camera base so

that it snaps into place (as shown in image 4), and do

not obstruct the camera lens.

Install the Dome Liner on

the Camera Module

Replace the dome cover

Replace the dome cover and rotate clockwise to close it (as shown in image 5).

Tighten the tamper-proof screw

Use the supplied torx driver and the tamper-

Tamper-proof Screw

proof screw (T2x5L) to secure the dome

cover.

Tighten tamper-proof

screw