IKEA IHW6530BS0 Руководство по эксплуатации и уходу - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Вентиляционная вытяжка IKEA IHW6530BS0. IKEA IHW6530BS0 44 страницы. 30" (76.2 cm) wall-mount canopy range hood

Печатать страницу
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect
power.
2. Remove terminal box cover using a T10 Torx ®drive (or the
T10 adapter provided) to remove screws.
3. Remove the knockout in the terminal box and install a UL
listed or CSA approved 1/2"strain relief.
//
4=
A
B
" //
C
//
///
l,
//
A. Knockout
B. Terminalbox
C. Terminalbox cover
Run home power supply cable through strain relief, into
terminal box.
A
D
5. Use UL listed wire connectors
and connect black wires (C)
together.
6. Use UL listed wire connectors
and connect white wires (E)
together.
Electrical Shock Hazard
Electrically ground blower.
Connect ground
wire to green and yellow ground wire
in terminal
box.
Failure to do so can result
in death or electrical
shock.
7. Connect green (or bare) ground wire from home power supply
to yellow-green
ground wire (F) in terminal box using UL listed
wire connectors.
8. Tighten strain relief screw.
9. Install terminal box cover.
10. Check that all light bulbs are secure in their sockets.
11. Reconnect power.
When using both upper and lower vent covers, push lower cover
down onto hood and lift upper cover to ceiling. Install with 2 - 4.2
x 8 mm T20 ®screws using a T20 ®Torx ®drive (or T20 ® adapter
provided) to tighten.
NOTE: For vented installations, the upper vent cover may be
reversed to hide slots.
V
E
F
A. Home power supply cable
B. UL listed or CSA approved strain relief
C. Black wires
D. UL listed wire connectors
E. White wires
F. Green (or bare) and yellow-green ground wires
A. Bracket
B. 4.2 x 8 mm T20 ® screws
C. Vent cover
10