Ganz Thermal ZNT6-H Краткое руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для IP-камера Ganz Thermal ZNT6-H. Ganz Thermal ZNT6-H 11 страниц. Fixed camera
Печатать страницуFixed Camera Quick Start Guide
Ganz Thermal Fixed Mount Components and Hardware Kit
Comparison between Old Base Mounts and New Hybrid Base
Cable Glands and Power Blocks for the Ganz Thermal Fixed
Mount 320x240 & 640x480 models
Mount
3
www.ganzsecurity.com
November 2014
Installing the Fixed Mount Camera
You will need the following items (not included) before you can install the
IP Camera (recommended tool list)
Power source: PoE Switch, 12-24V DC or 24V AC
IP Network
Ethernet Cable (STP Cat5 recommended)
Tripod or Mounting bracket for mounting the IP Camera
A Phillips head #2 screwdriver
2 Open End Wrenches – 1 inch (25mm), OR adjustable wrenches
A 6-inch scale OR ruler
Torque screwdriver set to 10 inch-pounds (Electric or manual)
Torx (hole in the middle) T10 Pin-In Security bit – 3.5 inch
(90mm) in Length (not required for shipments with Phillips head
screws)
Hex Wrench
RJ-45 connecter and
RJ-45 Crimping Tool
Suggested Tools for Analog Video (Fixed Mount):
Coax Cable
o
Coax Cable Cutter/Stripper
o
BNC Connector
o
BNC Crimping Tool
o
Recommended Tools