Ganz Thermal ZNT6-H Посібник із швидкого старту - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для IP-камера Ganz Thermal ZNT6-H. Ganz Thermal ZNT6-H 11 сторінок. Fixed camera

Fixed Camera Quick Start Guide

Ganz Thermal Fixed Mount Components and Hardware Kit

Comparison between Old Base Mounts and New Hybrid Base

Cable Glands and Power Blocks for the Ganz Thermal Fixed

Mount 320x240 & 640x480 models

Mount

www.ganzsecurity.com

November 2014

Installing the Fixed Mount Camera

You will need the following items (not included) before you can install the

IP Camera (recommended tool list)



Power source: PoE Switch, 12-24V DC or 24V AC



IP Network



Ethernet Cable (STP Cat5 recommended)



Tripod or Mounting bracket for mounting the IP Camera



A Phillips head #2 screwdriver



2 Open End Wrenches – 1 inch (25mm), OR adjustable wrenches



A 6-inch scale OR ruler



Torque screwdriver set to 10 inch-pounds (Electric or manual)



Torx (hole in the middle) T10 Pin-In Security bit – 3.5 inch

(90mm) in Length (not required for shipments with Phillips head

screws)



Hex Wrench



RJ-45 connecter and



RJ-45 Crimping Tool



Suggested Tools for Analog Video (Fixed Mount):

Coax Cable

Coax Cable Cutter/Stripper

BNC Connector

BNC Crimping Tool

Recommended Tools