Makita 1806B Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Makita 1806B. Makita 1806B 13 страниц. Power planer
Также для Makita 1806B: Руководство по эксплуатации (17 страниц), Разбивка на части (3 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (13 страниц), Руководство по эксплуатации (11 страниц)

OPERATION

1. End

2. Start

1. Sharpening holder

1. Wing nut

2. Blade (A)

3. Blade (B)

4. Side (D)

5. Side (C)

Planing operation

002578

First, rest the tool front base flat upon the workpiece surface without the

blades making any contact. Switch on and wait until the blades attain full

speed. Then move the tool gently forward. Apply pressure on the front of tool

at the start of planing, and at the back at the end of planing. Planing will be

easier if you incline the workpiece in stationary fashion, so that you can plane

somewhat downhill.

The speed and depth of cut determine the kind of finish. The power planer

keeps cutting at a speed that will not result in jamming by chips. For rough cut-

ting, the depth of cut can be increased, while for a good finish you should

reduce the depth of cut and advance the tool more slowly.

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

attempting to perform inspection or maintenance.

Sharpening the planer blades

Always keep your blades sharp for the best performance possible. Use the

002591

sharpening holder to remove nicks and produce a fine edge.

First, loosen the two wing nuts on the holder and insert the blades (A) and (B),

002589

so that they contact the sides (C) and (D). Then tighten the wing nuts.