Makita 1806B Kullanım Kılavuzu - Sayfa 8

Elektrikli Alet Makita 1806B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 1806B 13 sayfaları. Power planer
Ayrıca Makita 1806B için: Kullanım Kılavuzu (17 sayfalar), Parça Dağılımı (3 sayfalar), Kullanım Kılavuzu (10 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (11 sayfalar)

OPERATION

1. End

2. Start

1. Sharpening holder

1. Wing nut

2. Blade (A)

3. Blade (B)

4. Side (D)

5. Side (C)

Planing operation

002578

First, rest the tool front base flat upon the workpiece surface without the

blades making any contact. Switch on and wait until the blades attain full

speed. Then move the tool gently forward. Apply pressure on the front of tool

at the start of planing, and at the back at the end of planing. Planing will be

easier if you incline the workpiece in stationary fashion, so that you can plane

somewhat downhill.

The speed and depth of cut determine the kind of finish. The power planer

keeps cutting at a speed that will not result in jamming by chips. For rough cut-

ting, the depth of cut can be increased, while for a good finish you should

reduce the depth of cut and advance the tool more slowly.

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

attempting to perform inspection or maintenance.

Sharpening the planer blades

Always keep your blades sharp for the best performance possible. Use the

002591

sharpening holder to remove nicks and produce a fine edge.

First, loosen the two wing nuts on the holder and insert the blades (A) and (B),

002589

so that they contact the sides (C) and (D). Then tighten the wing nuts.