Makita 1806B Kullanım Kılavuzu - Sayfa 7
Elektrikli Alet Makita 1806B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 1806B 13 sayfaları. Power planer
Ayrıca Makita 1806B için: Kullanım Kılavuzu (17 sayfalar), Parça Dağılımı (3 sayfalar), Kullanım Kılavuzu (10 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (11 sayfalar)
Sayfayı Yazdır
(A) Front base (Movable shoe)
(B) Rear base (Stationary shoe)
Correct setting
Nicks in surface
Gouging at start
Gouging at end
1. Nozzle
2. Screwdriver
1
2
1. Nozzle
2. Vacuum cleaner
Connecting a vacuum cleaner
004888
For European countries and areas
1
When you wish to perform clean planing operation, connect a Makita vacuum
cleaner to your tool. Install the nozzle on the tool using the screws. Then con-
nect a hose of the vacuum cleaner to the nozzle as shown in the figures.
2
For other countries and areas
A nozzle and joint (optional accessories) are necessary to connect a Makita
004893
vacuum cleaner to your tool. Consult a Makita catalogue or representative on
the nozzle and joint.
(A)
(B)
(A)
(B)
(A)
(B)
Although this side view cannot
show it, the edges of the blades
run perfectly parallel to the rear
base surface.
Cause: One or both blades fails to
have edge parallel to rear
base line.
Cause: One or both blade edges
fails to protrude enough in
relation to rear base line.
Cause: One or both blade edges
protrudes too far in relation
to rear base line.
EN0004-1
7