CORNING LSE 6781-4 Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Лабораторное оборудование CORNING LSE 6781-4. CORNING LSE 6781-4 10 страниц. Digital microplate and orbital shakers
Печатать страницу
5.3 Additional Operations
Power
If you want to view the set value for RPM during shaking, rotate the encoder knob for ONE CLICK right (+) or left (-). The RPM signal
light will flash for 2 seconds, and the display will show the set RPM. After 2 seconds the RPM and the signal light will stop flashing.
NOTE: The shaker must be in RPM mode – RPM signal light must be on.
Power
If you want to view the set value for TIME during shaking, rotate the encoder knob ONE CLICK right (+) or left (-). The TIME signal
light will flash for 2 seconds, and the display will show the set TIME. After 2 seconds the display will return to the count TIME, and
the signal light will stop flashing.
NOTE: The shaker must be in the TIME mode – the TIME signal light must be on.
6.0 Troubleshooting
Problem
POWER key does not light
Shaker stalls – Message Er1
Display does not light
Message Er2 on display
Message Er3 on display
Message Er4 on display
Should you have a question about the operation of the Corning® LSE™ Digital Microplate and Orbital Shakers or if service is required,
please contact Corning Customer Service at 800.492.1110 or 978.442.2200.
6
|
CORNING LSE DIGITAL MICROPLATE AND ORBITAL SHAKERS
Run
Time
Speed
ENCODER
Speed(RPM) Time(min)
PUSH
(Time/Speed)
Run
Time
Speed
ENCODER
Speed(RPM) Time(min)
PUSH
(Time/Speed)
Solution
Check the power source.
Check fuses.
Power the unit down, then restart.
Contact Corning Customer Service.
Start
Stop
Start
Stop