Makita 4324 Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Makita 4324. Makita 4324 16 страниц. Jig saw
Также для Makita 4324: Руководство по эксплуатации (2 страниц), Руководство по эксплуатации (19 страниц), Руководство по эксплуатации (10 страниц)

Metal cutting

Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause

significant blade wear. The underside of the workpiece can be greased instead of using a

coolant

Dust extraction

Clean cutting operations can be performed

by connecting this tool to

Makita vacuum

cleaner. Insert the hose of the vacuum

cleaner into the hole at the rear of the tool.

Lower the dust cover before operation.

CAUTl

Dust extraction cannot be performed when

making bevel cuts.

Rip fence (optional accessory)

CAUTl

Always be sure that the tool is switched off and unplugged before installing

removing

accessories

1) Straight cuts

When repeatedly cutting widths of

160 mm (6-9/32") or less, use of the rip

fence (guide rule) will assure fast, clean,

straight cuts.

To install, insert the rip fence into the

rectangular hole on the side of the tool

base with the fence guide facing down.

Slide the rip fence to the desired cutting

width position, then tighten the bolt to

secure it.

Hex wrench

facing