Makita 4324 Інструкція з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 4324. Makita 4324 16 сторінок. Jig saw
Також для Makita 4324: Посібник з експлуатації (2 сторінок), Інструкція з експлуатації (19 сторінок), Інструкція з експлуатації (10 сторінок)
Друкувати сторінку
Metal cutting
Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause
significant blade wear. The underside of the workpiece can be greased instead of using a
coolant
Dust extraction
Clean cutting operations can be performed
by connecting this tool to
a
Makita vacuum
cleaner. Insert the hose of the vacuum
cleaner into the hole at the rear of the tool.
Lower the dust cover before operation.
CAUTl
ON
:
Dust extraction cannot be performed when
making bevel cuts.
Rip fence (optional accessory)
CAUTl
ON
:
Always be sure that the tool is switched off and unplugged before installing
or
removing
accessories
1) Straight cuts
When repeatedly cutting widths of
160 mm (6-9/32") or less, use of the rip
fence (guide rule) will assure fast, clean,
straight cuts.
To install, insert the rip fence into the
rectangular hole on the side of the tool
base with the fence guide facing down.
Slide the rip fence to the desired cutting
width position, then tighten the bolt to
secure it.
Hex wrench
facing
-
11