CORNING FTH-76 Series Краткое руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Шкаф CORNING FTH-76 Series. CORNING FTH-76 Series 4 страницы. Fiber transition housing
Печатать страницу6.
FEEDER CABLE INSTALLATION
Step 1:
Remove cable sheath and strength members per standard company practices.
Step 2:
Pierce grommet and insert feeder cable into the unit. Remove strain-relief hardware
using a can wrench. Strain-relieve the cable with the clamp as shown in Figure 3.
Step 3:
Route slack around the perimeter of the unit, securing to the lances with cable ties as
needed.
Step 4:
Remove dust caps from adapter and connector. Clean per standard company
practices. Mate connector into adapter as shown.
7.
DROP CABLE INSTALLATION
Direct
Connectorization
TPA-3692
Step 1:
Pierce grommet and insert cable into the unit. Remove strain-relief hardware with a
can wrench. Strain-relieve with the clamp as shown in Figure 3.
Step 2:
If splicing is required, splice to pigtails per the instructions provided with the splicing
equipment. Store fiber in the splice organizer and fiber management spool
(Figure 4).
Step 3:
Route slack around the perimeter of the unit, securing to the lances with cable ties as
needed.
Step 4:
Remove dust caps from adapter and connector. Clean per standard company
practices. Mate connector into adapter as shown.
8.
SECURE THE UNIT
Step 1:
Snap the outer cover closed. Secure with a can wrench.
Step 2:
If desired, install a padlock or security seal through the padlock hole.
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products
without prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other
trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2011, 2019 Corning Optical Communications.
All rights reserved.
STANDARD RECOMMENDED PROCEDURE 205-451 | ISSUE 3 | MAy 2019 | PAGE 4 OF 4
Fiber Management Spool and Splice Organizer
Fiber Manage-
ment Spool
Figure 4 — Install Drop Cable