Makita AN450H Техническая информация - Страница 14

Просмотреть онлайн или скачать pdf Техническая информация для Электроинструмент Makita AN450H. Makita AN450H 16 страниц. Pneumatic roofing coil nailer

Печатать страницу

epair

[4] DISASSEMBLY/ASSEMBLY

[4]-9 Adjuster assembly

DISASSEMBLING

(1) Disassemble Adjuster assembly together with Trigger base section as the left and center illustrations in Fig. 17

(2) Separate Adjuster assembly from Trigger base section as illustrated in Fig. 26.

(3) Disassemble the Adjuster assembly as illustrated in Figs. 27 and 28.

Fig. 26

Trigger

Base section

Compression

Spring 6

Adjuster

Assembly

Fig. 28

Align Adjuster piece to the side window

of Upper yoke by turning it by 90 degrees.

degrees

Adjuster piece

ASSEMBLING

(1) Assemble Adjuster piece to Contact arm by inserting its boss into Slide plate in Upper yoke. Refer to Fig. 28.

(2) Turn Adjuster piece in Upper yoke by 90 degrees so that Adjuster shaft can be driven to Adjuster piece.

Refer to Fig. 28.

(3) Assemble Compression spring 2 and Steel ball 2.3 to Upper yoke. Drive Adjuster shaft into Adjuster piece carefully

so as not to lose Steel ball 2.3 and Compression spring 2. Refer to the right illustration in Fig. 27.

(4) Assemble Spring pin 2-14. Refer to the left illustration in Fig. 27.

Fig. 27

Remove Adjuster shaft by turning carefully so as not to lose

Steel ball 2.3 and Compression spring 2.

Upper yoke

Compression

1R266

spring 6

Spring pin 2-14

Adjuster shaft

1R032

Remove Adjuster piece.

Slide plate can be removed from Upper yoke.

Adjuster piece

Slide plate

P 14/ 16

Compression

spring 2

Steel ball 2.3