airforte Aero 750 BM Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Очиститель воздуха airforte Aero 750 BM. airforte Aero 750 BM 15 страниц. Air cleaning unit

INTRODUCTION

The Aero 750 BM unit uses specially engineered nanotechnology filters which are combined
with ultraviolet light to disinfect and clean the air that travels through it. Also, active carbon
and ionization are used. The air is pushed through by means of a special low-noise fan.
WARNING:
Do not splash or pour water directly onto the unit. Water can cause an electric shock or can
damage the equipment. For service and cleaning always disconnect the unit from the mains
power supply.
NEVER REMOVE THE COVER WHEN THE UNIT IS WORKING.
NEVER LOOK DIRECTLY AT THE UV LIGHT.
Before installation
It is recommended that safety shoes and protective gloves are used during the installation
process. Other safety equipment might be necessary depending upon any localised
conditions. Personal protective equipment is not needed during the operation of the device.
Airforte International Ltd does not accept any liability for injuries caused during installation.
This device has been engineered and manufactured to ensure your personal safety; however
improper use may result in damage or injury.
CAUTION: The device must be installed at a height that will allow people to pass safely
underneath it without running the risk of striking it with their heads.
Only officially approved methods are allowed for installing the device. The minimum load
required is 20 kg per fixing point.
CAUTION: The installation method must be secured so that the Aero 750 BM unit cannot fall
off or come loose under any circumstances.
Unpacking and Checking
ATTENTION: Do not destroy or dispose of any of the packaging materials if the device is to be
transported in the future. Together with the transportation boxes they make an ideal
container in which to transport the device and its accessories.
Airforte Aero 750 BM User Manual
7