HIKVISION HiWatch Series Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для DVR HIKVISION HiWatch Series. HIKVISION HiWatch Series 15 страниц. Hd turret and bullet camera
Также для HIKVISION HiWatch Series: Краткое руководство по эксплуатации (15 страниц), Краткое руководство по эксплуатации (20 страниц), Краткое руководство по эксплуатации (18 страниц), Как сделать (4 страниц), Руководство пользователя (15 страниц)

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall, expansion bolts are required to



fix the camera. For wooden wall, self-tapping

screws are required.

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the surveillance angle.

1) Loosen the No.① adjusting screw to adjust the

pan position [0° to 360°]. Tighten the No.①

adjusting screw.

2) Loosen the No.② adjusting screw to adjust the

tilting position [0° to 90°]. Tighten the No.②

adjusting screw.

3) Loosen the No.③ adjusting screw to adjust the

rotation position [0° to 360°]. Tighten the No.③

adjusting screw.

2.2 Installation of Type II Camera

Before you start:

Both wall mounting and ceiling mounting are suitable

for the camera. We take ceiling mounting as an example

in this section. You can take the steps of ceiling

mounting as a reference, when adopting wall mounting.

Steps:

1. Disassemble the turret camera.

1). Use the screw driver to loosen the screw on the

mounting base.

2). Pull the clip plate out.

3). Take out of the camera body.

Figure 2-4 Disassemble the Camera

2. Paste the drill template (supplied) to the place

where you want to install the camera.

3. Drill the screw holes and the cable hole (optional)

on the ceiling according to the drill template.

Figure 2-3 3-axis Adjustment

Screw

Clip

Plate