Jands Stage Руководство - Страница 15

Просмотреть онлайн или скачать pdf Руководство для Музыкальный микшер Jands Stage. Jands Stage 17 страниц.

Configuring the Console

A 4 way DIP switch accessible through the rear panel enables the user to

change some of the operating parameters of the console. These are as

follows:-

To change the console configuration, remove console power, change

switch positions as desired, and reapply power. Changes will be active

immediately.

Please note that when DIP switch #1 is on, all other switches are ignored.

When DIP switch #4 is on, DIP switch #2 is ignored.

Use the STAGE as a slave console to an Event or ESP II

master console.

Reverse the operation of the P2 master fader such that it is at

full when it is at the 0 position. This is used to enable single

action crossfades.

Change the operation of the chase. See page 10.

Single preset wide mode. The console operates as a single

preset console, with flash buttons on the first 24 channels.

(12 for Stage 12)