Jands Stage Руководство - Страница 16

Просмотреть онлайн или скачать pdf Руководство для Музыкальный микшер Jands Stage. Jands Stage 17 страниц.

Appendix 1 - Pin Assignments

DMX Digital

Output Socket

Desk Link Cable

Power

Audio Trigger

PIN No

Signal

SHIELD

SIGNAL -

SIGNAL +

NOT USED

Connector type: Cannon 5 pin AXR

USITT DMX-512(1990) Protocol

To slave a STAGE console to expand an Event, Event Plus, or

ESP II console connect a cable wired as detailed below between

the DMX output of the STAGE to the MIDI input on the Event,

Event Plus, or ESP II console. Set DIP switch #1 on and apply

power to the STAGE console. Configure the Master console as

per the user manual. It is not possible to link two STAGE

consoles together.

Cannon 5 Pin

Din 5 Pin

PIN No

390R 1/4w 5% 4

Voltage

12 volts DC, floating output

Consumption

6 watts (9 watts 24 channel)

Connector

2.5mm co-axial plugpak connector

The STAGE consoles accept standard 12 volt DC plugpacks,

rated at 0.5A for 12 channels and 0.75A for 24 channel

consoles. Plug tip positive. Do not use the plugpack to power

other equipment at the same time.

Connector

Level

Trigger Frequency

Use a stereo connector for a balanced input signal, or a mono

connector for a single ended signal. Connector insertion auto-

matically sets the chase trigger source to the Audio signal

source.

6.5mm (1/4") Jack

line voltage

Approx 100Hz