Empire Sniper Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Оборудование для пейнтбола Empire Sniper. Empire Sniper 14 страниц.
Печатать страницу
this for each side.
• When re-installing the screws make sure to repeat the same steps of holding the
Pump Rods.
Pump Handle
• Using a 5/32" Allen wrench, remove the two screws located on the back of the
Pump Plate.
• Slide the pump handle off the pump guide rod and be careful not to lose the Pump
Return Spring which is located inside the handle.
Pump Rods and Sled
• Once the Bolt and Pump Plate have been removed, the Pump Rod and Sled
assembly will slide off the back of the marker.
Hammer Assembly
(Hammer, Main Spring, and Rear Adjuster)
It is recommended that you do not remove the Hammer unless you feel confidant in
setting the Hammer Lug correctly.
• Using a 3/16" Allen wrench, remove the Rear Adjuster and Main Spring.
• Next turn the Hammer Lug counterclockwise with a 1/8" Allen wrench until it is within
the bottom of the Hammer, thus visible thru the slot on the bottom of the body.
• The Hammer will slide out the back of the marker if the Hammer Lug is high enough
to create clearance.
Inline Regulator Assembly
• Turn the entire Inline Regulator Assembly counterclockwise to unscrew it from the
Vertical ASA.
Pump Guide and Vertical ASA
• Using a 3/16" Allen wrench, turn the Pump Guide counterclockwise to remove.
• Once the Pump Guide is removed the Vertical ASA will slide off the front of the
marker.
Valve Assembly
• The Valve Assembly should only be removed if maintenance is needed like an air leak.
• Once the marker is fully disassembled the valve assembly can be accessed.
• Remove the valve alignment screw from the bottom of the body using a flat head
screwdriver.
• Insert a Pump Rod into the front of the body and push the valve assembly out the
back of the marker.
10. STORAGE AND TRANSPORATION
IMPORTANT: Never carry your Empire marker uncased when not on a playing field.
The non-playing public and law enforcement personnel may not be able to distinguish
between a paintball marker and firearm. For your own safety and to protect the image
of the sport, always carry your Empire marker in a suitable marker case or in the box
in which it was shipped.
When you are finished using your Empire marker it is important that you prepare it
for storage. This will not only serve to increase the life of the marker, but will assure
optimum performance on your next outing.
• The Empire marker must be clear of all paint and air sources when not being used.
• Be sure to have marker de-cocked and in "Safe Mode" when not in use.
• Make sure a barrel blocking device is in place.
• Store your Empire marker and propellant in cool dry place.
• Keep your Empire marker away from unsupervised children.
• Your Empire marker must be free of all paint and not attached to a propellant source
while being transported to and from the playing field.
• Observe and obey all local, state and federal laws concerning the transportation of
paintball markers. For information concerning any of the laws in your area, contact
your local law enforcement.
• Always store the marker in a secure location when not in use so as to prevent
access by unauthorized persons.
11. DIAGRAMS / PARTS LIST
E M P I R E P A I N T B A L L . C O M
(Valve, Cupseal, and Valve Spring)
7