Empire Trracer Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Оборудование для пейнтбола Empire Trracer. Empire Trracer 12 страниц.

Печатать страницу

• Pull the trigger and check the reading on the chronograph.

• Insert the velocity adjuster Allen wrench into the Trracer's barrel

and slide it in till it stops, being careful not to damage the barrel

(Fig. 5.1).

• Turn the wrench slightly until you feel it lock into the velocity

adjuster.

• Turn the wrench

inward or clock-

wise to increase

the velocity, and

outward

c o u n te r- c l o c k -

wise to lower the

velocity of the

paintballs

dis-

charged

from

the marker.

6. Unloading Your Marker

Put on an eye protective device designed specifically for paintball

and make sure that anyone within range of your Empire marker

does the same.

• Make sure the barrel-blocking device is properly installed and

the marker is set to "safe mode".

• Remove the loader and all paintballs.

• While pointing the Empire marker in a safe direction, remove the

barrel-blocking device and fire the marker several times to

insure there are no balls remaining in the chamber or the barrel.

• Properly re-install the barrel-blocking device and set the marker

safety to "safe mode".

Removing Air Cylinder

• Put on an eye protective device designed specifically for paint-

ball and make sure that anyone within range of the Empire

marker does the same.

• Make sure the barrel-blocking device is properly installed on the

marker.

• While pointing the Empire marker in a safe direction, remove the

air cylinder, by turning it counter-clockwise.

• Air will vent before the air cylinder unthreads completely.

• The marker is now ready to be cleaned and put away for future

use.

7. Maintenance and Lubrication

Caution: Before attempting to perform any maintenance opera-

tions, make sure that all paintballs and propellant sources have

been removed from the marker. Install a barrel-blocking device;

marker must be unloaded and degassed before any disassembly

or maintenance.

Fig. 5.1

Once your Empire marker is unloaded and the air cylinder is

removed, you can use a damp cloth to wipe off paint, dirt, and

debris from the outside of your marker. Once your marker is clean

and dry you can re-oil using a light, premium marker oil. Do not

use any petroleum-based or aerosol products on your marker.

Petroleum-based and aerosol products can damage your markers

O-rings.

Cleaning Barrel /Breech Insert and Breech of Marker

• Push a paintball swab, like the Empire Swab, through the barrel

and breech area to clean them.

• Clean the outside of your marker using a paper towel or rag,

which can be dampened with warm water.

Lubricating the Bolt/Hammer Assembly

• See Section 8 for disassembly instructions.

• Wipe the parts clean and inspect the O-rings for damage or

E M P I R E P A I N T B A L L . C O M