Empire Trracer Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Оборудование для пейнтбола Empire Trracer. Empire Trracer 12 страниц.

Печатать страницу

Loader Installation

• To install a loader check the feed elbow and loader to make sure

they are free from debris and obstructions.

• Press the loader into the opening of the feed elbow until it stops.

• Align the loader so that the lid is pointing to the rear and the

loader is parallel with the marker.

• Clamp the loader in place by tightening the clamp arm; it may

be necessary to adjust the clamp. Do not over tighten the loader.

Feed Elbow Clamp Adjustment

The feed elbow clamp may need adjustment for different

types/brands of loaders. Adjust the clamp using a 3/32" Allen

wrench; turning the screw clockwise will increase the clamping

force, while turning in counter-clockwise will decrease the clamp-

ing force.

Before Pressurizing your Marker

Consult the place where you purchased your Empire marker, or a

recognized and competent air smith, for instruction in the safe

handling of compressed-air cylinders before purchasing or con-

necting one to your Empire marker.

• Check to make sure that you and anyone within range are wear-

ing eye protection designed specifically for paintball.

• Double check that all screws are tightened and no parts are

loose before installing your tank.

• Ensure you have a barrel plug, barrel sock, or other specifically

designed barrel-blocking device in place.

• Make sure there are no paintballs in the marker.

• Set marker to "safe mode".

Pressurizing your Marker

• While pointing the marker in a safe direction, locate the ASA (air

source adapter). The Trracer ASA is located at the back of the body.

• Insert the threaded

end of the air cylinder

into the ASA.

• Without pushing the

cylinder,

cylinder

and allow the threads

to draw the cylinder

into the marker's ASA

until it stops. Your

marker

charged (Fig. 3.3).

Warning:

• Remember compressed air, nitrogen systems, and CO2 cylin-

ders can be extremely dangerous if misused or improperly han-

dled. Use only cylinders meeting D.O.T. or regionally defined

specifications.

• Never disassemble your tank or tank regulator. Only a qualified

and trained technician should perform work on your tank and

tank regulator.

• Never add any lubricants or greases into the fill adapter on your

tank regulator.

Loading Paintballs

Empire markers use .68 caliber, water-soluble paintballs, readily

available at paintball pro-shops, commercial playing fields, and

many sporting goods stores. The paintballs are fed through the

feed elbow into the breech of the marker.

• Make sure the marker is set to "safe mode", safety on, and bar-

rel-blocking device on.

• Put on an eye protective device designed specifically for paint-

ball and make sure that anyone within range of the marker does

the same.

E M P I R E P A I N T B A L L . C O M

twist

the

clockwise

now

Fig. 3.3