Brizo SENSORI T66T0 Series Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Блок управления Brizo SENSORI T66T0 Series. Brizo SENSORI T66T0 Series 20 страниц. Thermostatic valve trim
Также для Brizo SENSORI T66T0 Series: Краткое руководство по эксплуатации (8 страниц), Руководство (8 страниц)

Печатать страницу

Optional Extension

Kit Available -

RP72604

Slide O-ring (1) over cartridge and the

bonnet nut (2). The O-ring,

which acts as a spacer to steady the

sleeve, should rest behind the

bonnet nut. Note: Depending on the

location of valve within the wall and

wall thickness, an optional extension kit

(RP72604) can provide

an additional 1 3/4" of wall thickness.

If your model requires a spacer (3), install

it into sleeve (4). Slide the sleeve over the

cartridge, body and O-ring. Ensure sleeve

is properly positioned over the front of

cartridge.

Secure the escutcheon (5) to the rough

(2) with the 2 screws provided (6). Do not

overtighten escutcheon screws.

Handle with Axial Screw

Remove the top button (7) from the handle

(if already assembled) by pulling straight

up. Select legacy models have a plastic

insert (8) inside the bottom of the handle.

For those models, verify plastic insert is

inside the handle. Make sure valve is in

the full cold position (to the right) and align

lever of lever handle models to the cold

position on the escutcheon and press

handle onto valve stem. Secure handle

with screw provided and press button back

into top of handle.

Handle with Side Screw

Select legacy models have a plastic insert

(8) inside the bottom of the handle. For those

models, verify the plastic insert is inside the

handle. Make sure valve is in the full cold

position and align lever of lever handle models

to the cold position on the escutcheon and

press handle onto valve stem. Secure handle

with set screw provided and install set screw

cover (if included).

102224 Rev. C