Brizo SENSORI T66T0 Series Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Блок управления Brizo SENSORI T66T0 Series. Brizo SENSORI T66T0 Series 20 страниц. Thermostatic valve trim
Также для Brizo SENSORI T66T0 Series: Краткое руководство по эксплуатации (8 страниц), Руководство (8 страниц)

Печатать страницу

Note: The Sensori

rough (R66000-WS) must be installed before

installing the trim.

Turn off water supplies from main or

inlet stops (1). Remove

plasterguard (2), bonnet nut (3) and test cap

(4) from the body.

Verify presence of either o-ring (on some

models) or friction bushing (4) located on

splined valve stem.

Locate flats (1) on cartridge (2) and inside

of sleeve (3). Align flats and insert cartridge

into sleeve being careful not to push on

copper element at end of cartridge.

R66000-WS

Thermostatic Valve

Locate "V" (1) on cartridge sleeve and "V"

notch (2) on valve body (3). Align the "Vs"

and press sleeve and cartridge assembly

(4) into valve body (3) and note the "UP"

position (5).

Slide bonnet nut (1) over the cartridge and

thread onto the body.

Hand tighten securely.

102224 Rev. C