Gardena EasyCut 400 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Триммер Gardena EasyCut 400. Gardena EasyCut 400 14 страниц. Gardena electric hedge trimmer operating instructions
Также для Gardena EasyCut 400: Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (7 страниц), Руководство по эксплуатации (10 страниц), Руководство по эксплуатации (15 страниц), (Французский) Руководство по эксплуатации (8 страниц)

Печатать страницу

Gardena EasyCut 400 Руководство по эксплуатации

Setting the working position :

Setting the trimmer

to body height :

Adjusting the plant guard :

Working position 1 :

Trimming without

wheels

The angle of the handle can be set to 3 working positions.

1. Push slider

working position (see scale

2. Let the slider

Setting the handle length :

v Open clamping lever

required handle length and close clamping lever

ATTENTION ! With EasyCut 400 / 480, ensure that when

adjusting the handle length the upper part of the handle

is not twisted.

Adjusting the additional handle :

v Press adjusting buttons in

handle

again.

When the trimmer is set to the correct body size, the body

is upright and the cutting head is angled slightly forwards in

working position.

v Hold the trimmer on the upper part of the handle

additional handle

angled forwards slightly.

Working position

v Turn plant guard

it locks into place.

ATTENTION !

Overloading of the motor.

V When trimming with wheels, working position 2

must be set.

Working position 2 :

Trimming with

wheels

up and set the handle

lock into the required working position.

, extend upper part of handle

to required angle and release the adjusting buttons

in such a way that the cutting head is

through 180° into the required position until

Working position 3 :

Trimming under

obstacles

to the required

again.

on both sides, set additional

Parking position

and