Lexmark MS510 Series Краткая справка - Страница 12

Просмотреть онлайн или скачать pdf Краткая справка для Принтер Lexmark MS510 Series. Lexmark MS510 Series 18 страниц. Machine type 4514-630, 4514-635, 4514-636
Также для Lexmark MS510 Series: Техническая записка (3 страниц), Руководство по перемещению (2 страниц), Руководство (20 страниц), Руководство по подключению (6 страниц), Руководство по печати (5 страниц), Бумажное руководство (4 страниц), Информационный справочник (1 страниц), Установочный лист (2 страниц), Характеристики (2 страниц), Руководство по эксплуатации (18 страниц), Краткая справка (17 страниц)

Печатать страницу
Lexmark MS510 Series Краткая справка
•
Load letterhead faceup with the top edge entering the printer
first. For two‑sided (duplex) printing, load letterhead facedown
with the bottom edge entering the printer first.
•
Load envelopes with the flap on the left side facedown.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
5
From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper or specialty media loaded
in the multipurpose feeder.

Clearing jams

Avoiding jams

Load paper properly
•
Make sure paper lies flat in the tray.
Correct loading of paper
Incorrect loading of paper
•
Do not remove a tray while the printer is printing.
•
Do not load a tray while the printer is printing. Load it before
printing, or wait for a prompt to load it.
•
Do not load too much paper. Make sure the stack height is below
the maximum paper fill indicator.
12
•
Do not slide the paper into the tray. Load paper as shown in the
illustration.
•
Make sure the guides in the tray or the multipurpose feeder are
properly positioned and are not pressing tightly against the paper
or envelopes.
•
Push the tray firmly into the printer after loading paper.
Use recommended paper
•
Use only recommended paper or specialty media.
•
Do not load wrinkled, creased, damp, bent, or curled paper.
•
Flex, fan, and straighten paper before loading it.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same tray.