Lexmark MS510 Series Краткая справка - Страница 14

Просмотреть онлайн или скачать pdf Краткая справка для Принтер Lexmark MS510 Series. Lexmark MS510 Series 18 страниц. Machine type 4514-630, 4514-635, 4514-636
Также для Lexmark MS510 Series: Техническая записка (3 страниц), Руководство по перемещению (2 страниц), Руководство (20 страниц), Руководство по подключению (6 страниц), Руководство по печати (5 страниц), Бумажное руководство (4 страниц), Информационный справочник (1 страниц), Установочный лист (2 страниц), Характеристики (2 страниц), Руководство по эксплуатации (18 страниц), Краткая справка (17 страниц)

Печатать страницу
Lexmark MS510 Series Краткая справка
3
Lift the green handle, and then pull out the imaging unit from the
printer.
Warning—Potential Damage: Do not touch the shiny blue
photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.
4
Place the imaging unit aside on a flat, smooth surface.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
5
Lift the green flap in front of the printer.
6
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
14
7
Insert the imaging unit by aligning the arrows on the side rails of
the unit with the arrows on the side rails inside the printer, and
then insert the imaging unit into the printer.
8
Insert the toner cartridge by aligning the side rails of the cartridge
with the arrows on the side rails inside the printer, and then insert
the cartridge into the printer.
9
Close the front door.
10
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
to clear the message
.