Makita 6305 Техническая информация - Страница 4

Просмотреть онлайн или скачать pdf Техническая информация для Сверло Makita 6305. Makita 6305 8 страниц. 13mm (1/2")
Также для Makita 6305: Технические характеристики (2 страниц), Руководство по эксплуатации (9 страниц)

epair

[3] -3. Armature

DISASSEMBLING

1) Remove Drill chuck as described in [3] -1.

2) Remove Carbon brush, and unscrew four 5x40 Tapping screws that fasten Gear housing to Motor housing.

3) Separate Gear housing from Gear housing cover complete. (Fig. 4)

4) From Motor housing, separate Gear housing cover complete together with Armature. (Fig. 10)

5) Remove Ball bearing 608LLB from the drive-end of Armature using Bearing extractor (No.1R269). (Fig. 11)

Fig. 10

Gear housing cover complete

Armature

Motor housing

6) Remove Ball bearing 608LLB from the commutator end of

Armature as described below:

The space between the ball bearing and Insulation washer is so

tight that claws of bearing extractor cannot grab the ball bearing.

Therefore, after setting Bearing Extractor (No.1R269) on the

ball bearing, clamp the backs of the claws securely with a water

pump pliers or the like as illustrated in Fig.

Now ball bearing 608LLB can be removed by turning the handle

of No.1R269 clockwise.

Note: Be careful not to damage the commutator.

ASSEMBLING

Do the reverse of the disassembling steps.

Fig. 11

No.1R269

Fig. 12

No.1R269

12.

P 4 / 8

Ball bearing 608LLB

Ball Bearing 608LLB

Water pump pliers