Makita 6305 Teknik Bilgiler - Sayfa 4

Matkap Makita 6305 için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Makita 6305 8 sayfaları. 13mm (1/2")
Ayrıca Makita 6305 için: Teknik Özellikler (2 sayfalar), Kullanım Kılavuzu (9 sayfalar)

Sayfayı Yazdır

epair

[3] -3. Armature

DISASSEMBLING

1) Remove Drill chuck as described in [3] -1.

2) Remove Carbon brush, and unscrew four 5x40 Tapping screws that fasten Gear housing to Motor housing.

3) Separate Gear housing from Gear housing cover complete. (Fig. 4)

4) From Motor housing, separate Gear housing cover complete together with Armature. (Fig. 10)

5) Remove Ball bearing 608LLB from the drive-end of Armature using Bearing extractor (No.1R269). (Fig. 11)

Fig. 10

Gear housing cover complete

Armature

Motor housing

6) Remove Ball bearing 608LLB from the commutator end of

Armature as described below:

The space between the ball bearing and Insulation washer is so

tight that claws of bearing extractor cannot grab the ball bearing.

Therefore, after setting Bearing Extractor (No.1R269) on the

ball bearing, clamp the backs of the claws securely with a water

pump pliers or the like as illustrated in Fig.

Now ball bearing 608LLB can be removed by turning the handle

of No.1R269 clockwise.

Note: Be careful not to damage the commutator.

ASSEMBLING

Do the reverse of the disassembling steps.

Fig. 11

No.1R269

Fig. 12

No.1R269

12.

P 4 / 8

Ball bearing 608LLB

Ball Bearing 608LLB

Water pump pliers