A&E Systems Electrolux AW300 Руководство по установке и эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Аксессуары A&E Systems Electrolux AW300. A&E Systems Electrolux AW300 8 страниц. Direct mounting case awning for mini-motorhomes, pick-up campers, vans, van conversions & pop-up tent trailers

Печатать страницу

OPERATION INSTRUCTIONS

TO OPEN

BOTTOM

1. Using Wand, open awning Case by inserting Pin on end

of Wand into hole in Arm Assembly indicated by arrows

on bottom of Case. Fig. 1.

2. Lower Arm Assembly out of awning Case. Fig. 2.

3. A. Slide Outer Arm down to ground. With Foot still

on ground, raise Inner Arm as high as it will go and

tighten Lock Knob. Fig. 3A.

Repeat for other side.

NOTE: Make sure Lock in top of awning Arm Assembly

clears top of Case Lip. Fig. 3B.

This is necessary for awning to open properly.

3 c

AWNING

Using Wand, hook Pull-Strap and pull awning

out about 3 feet (1 meter). Fig. 3C.

While securely holding the Pull-Strap, tighten

the Lock Knobs on the Rafter Arms. Fig. 3D.

SIDE VIEW

D. Set awning into Pivot Position by inserting the awn-

ing Foot into the Bottom Mounting Bracket Figs. 4A

and 4B.

BOTTOM

. FOOT

4. A. Set awning into Pivot Position by inserting the awn-

ing Foot into the Bottom Mounting Bracket Figs. 4A,

4B and 4C.

INNER

- A R M

B. Extend Arm Assembly until arrow on

up with Outer Arm. Fig. 4D.

This allows Lock in top of awning Arm Assembly to

clear top of Case Lip. Fig. 3B.

NOTE: This is necessary for awning to open properly.

C. Tighten Lock Knob on Arm Assembly.

5. Using Wand, hook Pull-Strap and pull awning out by

unrolling the fabric. Figs. 5A and 5B.

FULL EXTENSION

During operation for fully extended awning, fabric can be

rolled out and Rafter Lock Buttons will automatically snap

5 B

Inner

Arm lines