Garmin GNS 430 Руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Дисплей авионики Garmin GNS 430. Garmin GNS 430 27 страниц. Friendlypanels gps for microsoft fs9 & fsx
Также для Garmin GNS 430: Руководство пилота (22 страниц), Руководство по эксплуатации (6 страниц), Дополнение к руководству пилота (27 страниц), Дополнение к руководству пилота (4 страниц), Краткая справка (23 страниц), Дополнение к руководству пилота (22 страниц), Технические характеристики (2 страниц), Руководство по эксплуатации пилота (10 страниц), Быстрая рефенс (17 страниц)

3.2 WPT PAGE GROUP

This second page group provides information for thousands of airports, VORs, NDBs,

intersections, runways, frequencies, and procedures.

To quickly select a WPT page:

1. From any page, press and hold the CLR Key to select the Default NAV Page.

2. Turn the large right knob to select the WPT Page Group. 'WPT' appears in the

lower right corner of the screen.

3. Turn the small right knob to select the desired WPT page. The WPT Page

Group includes seven pages. While viewing any WPT page, turn the small right

knob to select a different WPT page. The first four pages provide detailed

information for the selected airport: location, runways, frequencies and

approaches. The last three pages provide information for intersections, NDBs

and VORs. After a WPT page is selected, information for a waypoint may be

viewed by entering the identifier (or name) of the desired waypoint. Airports,

NDBs, and VORs may be selected by identifier or facility name.

To enter a waypoint identifier:

1. Select the desired WPT page and press the small right knob to activate the

cursor.

2. Turn the small right knob to select the first character of the waypoint's

identifier. Once the first character is flashing you can use the PC keyboard to

enter an identifier.

3. Turn the large right knob to select the next character field.

4. Turn the small right knob to select the desired character.

5. Repeat steps 3 and 4 until the identifier is selected, then press the ENT Key.

6. To remove the flashing cursor, press the small right knob.