Garmin GNS 430 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Дисплей авионики Garmin GNS 430. Garmin GNS 430 27 страниц. Friendlypanels gps for microsoft fs9 & fsx
Также для Garmin GNS 430: Руководство пилота (22 страниц), Руководство по эксплуатации (6 страниц), Дополнение к руководству пилота (27 страниц), Дополнение к руководству пилота (4 страниц), Краткая справка (23 страниц), Дополнение к руководству пилота (22 страниц), Технические характеристики (2 страниц), Руководство по эксплуатации пилота (10 страниц), Быстрая рефенс (17 страниц)

2. COMMUNICATING BY USING THE GNS 430

A frequency may be quickly selected from the database by simply highlighting the

desired frequency on any of the main pages and pressing the ENT Key. This process is

referred to as auto-tuning. Once a frequency is selected in the standby field, it may be

transferred to the active frequency by pressing the COM Flip-flop Key. For example:

To auto-tuning a COM frequency for an airport:

1) Turn the large right knob to select the WPT Page Group.

2) Turn the small right knob to display the Frequency Airport Page

3) Press the small right knob momentarily to active the cursor.

4) To select a frequency, turn the large right knob to highlight the desired frequency

and press the ENT Key to place the frequency in the standby field of the COM Window.

To select a COM frequency:

1) If the tuning cursor is not currently in the COM Window, press the small left knob.

2) Turn the large left knob (click area 3) to select the desired megahertz (MHz) value.

For example, the '118' portion of the frequency '118.000'.

3) Turn the small left knob (click area 5) to select the desired kilohertz (kHz) value. For

example, the '.000' portion of the frequency '118.000'.

NOTE: The active frequency in either window cannot be accessed directly, only the

standby frequency is highlighted by the tuning cursor.

4) To make the standby frequency become the active frequency, press the COM Flip-

flop Key (click area 20)

The tuning cursor is normally in the COM Window. To select a VOR/Localizer/ILS

frequency, press the small left knob (click area 4) momentarily to place the cursor in the

VLOC Window.