Garmin Reactor 40 Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Морское оборудование Garmin Reactor 40. Garmin Reactor 40 25 страниц. Mechanical
Также для Garmin Reactor 40: Руководство по установке (11 страниц), Руководство по установке (13 страниц), Руководство по установке (29 страниц), Руководство по конфигурации (8 страниц)

Hydraulic Layouts

NOTICE

If the steering system in your boat does not match any of the hydraulic layouts in this manual and you are

unsure how to install the pump, contact Garmin Product Support.

Before you start the pump installation, identify the type of hydraulic steering system in your boat. Each boat is

different, and you must consider certain aspects of the existing hydraulic layout before deciding where to mount

the pump.

Before you start the pump installation, you should throughly review the hydraulic considerations for important

information on hydraulic hose and fitting types, installation methods, and thread-sealant information.

Important Considerations

• The three hydraulic ports on the pump are

in. NPT.

• You should use T-connectors (not included) to connect the hydraulic lines to the pump.

• To allow for easy pump isolation and removal, you should install shut-off valves (not included) in the

hydraulic lines between the pump manifold and T-connectors.

• An appropriate thread sealant should be used on all pipe threads in the hydraulic system.

Single-Helm Layout