Brother MFC-J6920DW Руководство по быстрой настройке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Принтер "все в одном Brother MFC-J6920DW. Brother MFC-J6920DW 31 страница. Brother all in one printer
Также для Brother MFC-J6920DW: Руководство по технике безопасности (21 страниц), Руководство по безопасности продукции (20 страниц), Руководство по быстрой настройке (45 страниц), Руководство по безопасности продукции (25 страниц), Руководство по технике безопасности (20 страниц)

Печатать страницу
Brother MFC-J6920DW Руководство по быстрой настройке
f
Fan the stack of paper well to avoid paper jams
and misfeeds.
NOTE
Always make sure that the paper is not curled or
wrinkled.
g
Gently put the paper into paper tray #1.
h
Gently adjust the paper side guides to fit the
paper with both hands. Make sure that the
paper side guides touch the sides of the paper.
i
Check that the paper is flat in the tray and
below the maximum paper mark.
j
Slowly push the paper tray completely into the
machine.
k
While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
NOTE
For printing and copying on special print media,
open the manual feed slot a on the back of the
machine. Feed only one sheet at a time.
1
5

Check the print quality

NOTE
If your machine has two paper trays, make sure
there is paper in tray #1, the upper tray, when
checking the print quality.
a
When the preparation process has finished, the
Touchscreen shows Load paper and
press [OK].
Press OK.
b
Check the quality of the four colour blocks on
the sheet (black/yellow/cyan/magenta).
c
If all lines are clear and visible, press Yes to
finish the quality check and go to the next step.
If lines are missing, press No and follow the
steps on the Touchscreen.
5