Brother MFC-J6920DW Hızlı Kurulum Kılavuzu - Sayfa 5

Hepsi Bir Arada Yazıcı Brother MFC-J6920DW için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC-J6920DW 31 sayfaları. Brother all in one printer
Ayrıca Brother MFC-J6920DW için: Güvenlik Kılavuzu (21 sayfalar), Ürün Güvenlik Kılavuzu (20 sayfalar), Hızlı Kurulum Kılavuzu (45 sayfalar), Ürün Güvenlik Kılavuzu (25 sayfalar), Güvenlik Kılavuzu (20 sayfalar)

Fan the stack of paper well to avoid paper jams

and misfeeds.

NOTE

Always make sure that the paper is not curled or

wrinkled.

Gently put the paper into paper tray #1.

Gently adjust the paper side guides to fit the

paper with both hands. Make sure that the

paper side guides touch the sides of the paper.

Check that the paper is flat in the tray and

below the maximum paper mark.

Slowly push the paper tray completely into the

machine.

While holding the paper tray in place, pull out

the paper support until it clicks, and then unfold

the paper support flap.

NOTE

For printing and copying on special print media,

open the manual feed slot a on the back of the

machine. Feed only one sheet at a time.

Check the print quality

NOTE

If your machine has two paper trays, make sure

there is paper in tray #1, the upper tray, when

checking the print quality.

When the preparation process has finished, the

Touchscreen shows Load paper and

press [OK].

Press OK.

Check the quality of the four colour blocks on

the sheet (black/yellow/cyan/magenta).

If all lines are clear and visible, press Yes to

finish the quality check and go to the next step.

If lines are missing, press No and follow the

steps on the Touchscreen.