Brother MFC-J6920DW Hızlı Kurulum Kılavuzu - Sayfa 4

Hepsi Bir Arada Yazıcı Brother MFC-J6920DW için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC-J6920DW 31 sayfaları. Brother all in one printer
Ayrıca Brother MFC-J6920DW için: Güvenlik Kılavuzu (21 sayfalar), Ürün Güvenlik Kılavuzu (20 sayfalar), Hızlı Kurulum Kılavuzu (45 sayfalar), Ürün Güvenlik Kılavuzu (25 sayfalar), Güvenlik Kılavuzu (20 sayfalar)

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a counterclockwise until it

clicks to release the vacuum seal. Then

remove the orange protective packing a as

shown.

IMPORTANT

• DO NOT shake the ink cartridges. If ink stains

your skin or clothing, wash with soap or

detergent at once.

• DO NOT touch the cartridge in the area

indicated b, as this can cause the machine not

to function with the cartridge.

Take care to match the sticker colour with the

cartridge colour.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the back of the ink cartridge

marked "PUSH" until the cartridge lever lifts.

After all the ink cartridges are installed, close

the ink cartridge cover.

NOTE

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine. We

recommend you perform the next step while

waiting.

Load plain A4 paper

Pull paper tray #1, the upper tray completely

out of the machine.

Gently press and slide the paper side guides a

to fit the paper size. Make sure that the

triangular mark b on the paper side guide a

lines up with the mark for the paper size you

are using.

Open the output paper tray cover.

Gently press and slide the paper length

guide a to fit the paper size.

Make sure that the triangular marks b on the

paper length guide a lines up with the mark for

the paper size you are using.

Close the output paper tray cover.