Brother DCP-J752DW Руководство по быстрой настройке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Принтер Brother DCP-J752DW. Brother DCP-J752DW 23 страницы. Printers
Также для Brother DCP-J752DW: Air Print Manual (12 страниц), Руководство по быстрой настройке (31 страниц), Руководство по безопасности продукции (16 страниц)

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a counterclockwise until it

clicks to release the vacuum seal. Then

remove the orange protective packing a as

shown.

IMPORTANT

• DO NOT shake the ink cartridges. If ink stains

your skin or clothing, wash with soap or

detergent at once.

• DO NOT touch the cartridge in the area

indicated b, as this can cause the machine not

to function with the cartridge.

Take care to match the sticker colour with the

cartridge colour.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the back of the ink cartridge

marked "PUSH" until the cartridge lever lifts.

After all the ink cartridges are installed, close

the ink cartridge cover.

NOTE

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine. We

recommend you perform the next step while

waiting.

Load plain A4 paper

Pull the paper tray completely out of the

machine.

Open the output paper tray cover.

Gently press and slide the paper width

guides a and then the paper length guide b to

fit the paper size.

Make sure that the triangular marks c on the

paper width guides a and paper length

guide b line up with the mark for the paper size

you are using.

Fan the stack of paper well to avoid paper jams

and misfeeds.

NOTE

Always make sure that the paper is not curled or

wrinkled.