Brother P-Touch PT-D200 Руководство пользователя

Просмотреть онлайн или скачать pdf Руководство пользователя для Изготовитель этикеток Brother P-Touch PT-D200. Brother P-Touch PT-D200 1 страница. Home and office labeler
Также для Brother P-Touch PT-D200: Руководство пользователя (1 страниц), Руководство пользователя (1 страниц), Руководство пользователя (3 страниц), Характеристики (2 страниц), Руководство пользователя (2 страниц)

Печатать страницу

Brother P-Touch PT-D200 Руководство пользователя

Safety Precautions

Indicates a potentially hazardous

WARNING

situation which, if not avoided,

could result in death or serious

injuries.

Follow these guidelines to avoid the risk of fire, burns, injury, electric

shocks, rupture, overheating, abnormal odours or smoke.

• Always use the specified voltage and the suggested AC adapter (AD-24ES: Optional

on the PT-D200) for the P-touch labeler to prevent any damage or failure.

• Do not touch the P-touch labeler during a lightning storm.

• Do not use the P-touch labeler/AC adapter in places of high humidity such as

bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly

bend or pull the power cord. Always hold the AC adapter when disconnecting from

the power outlet.

• Make sure that the plug is fully inserted to the power outlet. Do not use an outlet that

is loose.

User's Guide

• Do not allow the P-touch labeler/AC adapter/power plug/batteries to get wet, for

example, by handling them with wet hands or spilling beverages on to them.

• Since loss of eyesight may result when leaked fluid from batteries gets into your eyes,

English

immediately rinse your eyes with a large amount of clean water, and then seek

medical attention.

Thai

• Do not disassemble or modify the P-touch labeler/AC adapter/batteries.

• Do not allow a metal object to contact both the plus and minus ends of a battery.

• Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.

With your PT-D200/E200, you can create labels for multiple

• Do not throw the batteries into fire or expose to heat.

applications. Select from the many frames, character sizes and

• Disconnect the AC adapter and remove batteries immediately and stop using the

styles to design beautiful custom labels. In addition, the variety

P-touch labeler if you notice abnormal odor, heat, discoloration, deformation or

anything unusual while using or storing it.

of tape cartridges available allows you to print labels with

• Do not use a damaged or leaking battery as the fluid may get on your hands.

different widths and exciting colors.

• Do not use a deformed or leaking battery or one whose label is damaged. There is a

Read this manual carefully before starting and keep the manual

possibility of generating heat.

in a handy place for future reference.

Printed in China

LAB579001

Power Supply and Tape Cassette

Print head

Cassette

cover

Tape cutter

lever

Open the cassette cover by pressing the

Insert six new AAA alkaline batteries (LR03) or

above indicated area at the top end of the

fully charged Ni-MH batteries (HR03), making

machine.

sure that their poles point in the correct

directions.

If a tape cassette is already installed, remove it by

pulling it straight up. Also, if batteries are already

Users of alkaline batteries:

installed, remove them.

Always replace all six batteries at the same

• Make sure that the power is turned off when

time with brand new ones.

replacing batteries or tape cassettes.

Users of Ni-MH batteries:

Always replace all six batteries at the same

time with fully charged ones.

NOTE

Visit us at http://solutions.brother.com/ for the latest

information about the recommended batteries.

LCD Display & Keyboard

Size

13. Power key

Cursor

14. Menu key

Underline/Frame

15. Font key

Width

16. Character key

Style

17. Shift key

Caps

18. Print key

English Text Mode

19. Preview key

Label Length

20. Frame key

If a specific label length has been

21. Symbol key

selected,

also appears.

22. Decorative Mode key

Cursor key : Right (Use with

23. Backspace key

Shift key to go to end of the

24. Enter key

text.)

25. Caps key

10. OK key

26. Eng/Thai key

11. Escape key

27. Space key

12. Cursor key : Left (Use with

Shift key to go to top of the

text.)

NOTE

• The LCD shows one row of 15 characters; however, the text

that you enter can be up to 80 characters in length.

• While selecting the settings, press Space key to go back to the

default item.

• The print preview is a generated image of the label, and may

differ from the actual label when printed.

• Label length shown on LCD may slightly differ from the actual

label length when printed.

Troubleshooting

 Error message

Message

Cause/Remedy

Message

Cause/Remedy

You tried to print or preview a label when there is no

No Cassette!

cassette installed.

The batteries are weak.

If using AAA alkaline batteries: Replace them with new

Low Battery!

Tape cutter lever is used in the middle of printing

ones.

Cutter Error

process.

If using Ni-MH batteries: Charge them fully.

The maximum number of characters (80 characters, 50

Battery Dead

The installed batteries are running low.

Text Full!

characters for Decorative Mode or Name Label

function) have already been entered.

• There is no text above the cursor when you selected

[Numbering].

With the Decorative Mode or Name Label function:

• Invalid character is selected for [Numbering].

Since the number of entered characters exceeds the

Invalid!

• Invalid number is selected for [Tab Length] or [Label

label length, reduce the text.

Length].

Text Limit!

All other functions:

Since the number of entered characters exceeds the

• An invalid value was entered as the label length while

label length, reduce the text, or select [Auto] as the

using the Decorative Mode or Name Label function.

label length.

• You tried to print a text file when there is no data

stored in the memory.

Printing on 3.5mm tape with invalid Frame setting ON.

No Frame OK?

(Select

to print with no Frame,

•

is pressed when no text is entered.

cancel.)

• You tried to select [Numbering], [Mirror], or Text

No Text!

Feeding tape after printing when [Chain Print] is

Preview when no text is entered.

OK to Feed?

selected. Refer to "Setting Margin".

•

was pressed when no text was

Only 12mm tape cassette is available for Decorative

Insert 12mm

entered while using the Decorative Mode or Name

Mode or Name Label function.

Label function.

Wrong Tape!

Use a tape cassette with the

Vertical printing is impossible if entry was made in Thai

• You tried to enter a 3rd line by pressing

characters.

Line Limit!

• You tried to print or preview two lines of text while

No vertical OK?

(Select

to print no Vertical,

3.5mm or 6 mm tape is installed. Install tape of a

larger size.

cancel.)

• Do not place the P-touch labeler/batteries/AC adapter in direct sunlight or rain, near

CAUTION

Indicates a potentially hazardous

heaters or other hot appliances, in any location exposed to extremely high or low

situation which, if not avoided, may

temperatures (e.g., on the dashboard or in the back of your car) or high humidity, or

result in minor or moderate injuries.

in dusty locations.

• Do not apply excessive pressure to the cutter lever.

Follow these guidelines to avoid personal injury, liquid leakage,

• Do not try to print if the cassette is empty; it will damage the print head.

burns or heat.

• Do not pull the tape while printing or feeding; it will damage the tape and the P-touch

labeler.

• When the P-touch labeler is not being used, store it out of the reach of children. In

• Any data stored in memory will be lost due to failure or repair of the P-touch labeler,

addition, do not allow children to put the P-touch labeler parts or labels in their

or if the battery expires.

mouths. If any object has been swallowed, seek medical attention.

• The P-touch labeler is not equipped with a charging feature for rechargeable

• Do not touch metal parts around the print head immediately after printing.

batteries.

• Do not touch the cutter blade.

• The printed text may differ from the text that appears in the LCD.

• If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with

• The length of the printed label may differ from the displayed label length.

clean water.

• A protective clear plastic sticker it placed over the display during manufacturing and

• Remove the batteries and disconnect the AC adapter if you do not intend to use the

shipping. This sticker should be removed prior to use.

P-touch labeler.

• When power is disconnected for more than three minutes, all text, format settings and

• Do not use a battery other than that specified. Do not use combinations of old and

any text files stored in the memory will be cleared.

new batteries or combinations of different types, different charging levels, different

manufacturers or different models. Do not insert a battery with its plus and minus

ends reversed.

 Contact Information

• Do not drop or hit the P-touch labeler/AC adapter.

• Do not press on the LCD display.

Contact may differ by country.

• Do not put your finger inside the P-touch labeler when you close the cassette cover.

See the Web site. (http://www.P-touch.com/)

• Before using Ni-MH rechargeable batteries, carefully read the instructions for the

batteries and battery charger, and be sure to use them correctly.

• When using Ni-MH rechargeable batteries, charge the batteries with a specialized

battery charger before using the batteries.

General Precautions

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, the color of the label may change or be transferred

to other objects. Before applying the label, check the environmental conditions and

the material.

• Do not use the P-touch labeler in any way or for any purpose not described in this

guide. Doing so may result in accidents or damage the P-touch labeler.

• Use only Brother TZe tapes with the P-touch labeler. Do not use tapes that do not

have the

mark.

• Only use a soft, dry cloth to clean the labeler; never use alcohol or other organic

solvents.

• Use a soft wipe to clean the print head; never touch the print head.

• Do not put any foreign objects into the tape exit slot or AC adapter connector or

battery compartment, etc.

Cutter's

End of tape

edge

Toothed

Wheel

Tape

Tape guide

exit slot

Insert a tape cassette, making sure that it

Securely close the cassette cover, making sure

snaps into place.

that it snaps into place.

• Make sure that the end of the tape feeds under the tape

NOTE

guides.

• Use only Brother TZe tapes with this machine.

When using AC adapter (AD-24ES: Optional on the

PT-D200)

Insert the plug on the adapter cord into the AC

adapter jack on the top end of the machine.

Insert the plug into the nearest standard electrical outlet.

For memory back up, we recommend using AAA

alkaline batteries (LR03) or Ni-MH batteries (HR03)

together when using the AC adapter.

Specifications

Initial Settings

Dimensions:

Approx. 165(W) × 155(D) × 68(H)mm

Start your machine.

(W x D x H)

Supply power by using six AAA batteries or the AC adapter

Weight:

Approx. 490 g

(without batteries and tape cassette)

(AD-24ES: Optional on the PT-D200), and then press

Power supply:

Six AAA alkaline batteries (LR03)

Set the language.

Six AAA Ni-MH batteries (HR03)*

AC adapter (AD-24ES: Optional on the

The default setting is [Thai].

PT-D200)

Tape cassette:

Brother TZe tape (width)

3.5mm,6mm,9mm,12mm

Carrying Case: This accessory is only applicable to the PT-E200.

NOTE

Visit us at http://solutions.brother.com/ for the latest

information about the recommended batteries.

• The machine automatically turns off if no keys are pressed within

five minutes.

• To cancel any operation, press

Resetting the P-touch

You can reset the P-touch labeler when you want to initialize the

settings, or in the event the P-touch labeler is not working properly.

Turn off the P-touch labeler, hold down

and

and then press

to turn the P-touch

back on.

Release

and

The P-touch labeler turns on with the internal memory reset.

NOTE

All text, settings and stored files are cleared.

 What to do when...

Problem

Solution

The machine

has "locked up"

The display

• Check that the batteries are correctly inserted.

(i.e., nothing

stays blank

• If the batteries are weak, replace them.

after you have

happens when

• Check that the AC adapter (AD-24ES: Optional on

a key is

turned on the

the PT-D200) is correctly connected.

machine.

pressed, even

though the

When the label

machine is on.)

is printed out,

• See "Setting Margin" in this users guide and select

there is too

The power

[Half] or [Narrow] to have smaller margins for your

much margin

turns off when

label.

(space) on both

you try to print.

sides of the text.

The tape does

The machine

not feed

does not print,

• Check that the tape cassette has been inserted

properly or the

or the printed

correctly.

tape gets stuck

characters are

• If the tape cassette is empty, replace it.

inside the

not formed

• Check the cassette cover is properly closed.

machine.

properly.

All text and

• The batteries may be weak. Replace them.

The setting has

format settings

• When power is disconnected for more than three

cleared on its

need to be

minutes, all text & formats in the display will be lost.

own.

Language and Unit settings will also be cleared.

cleared to

mark.

create a new

• There maybe some dust on the print head. Remove

A blank

label.

the tape cassette and use a dry cotton swab to gently

horizontal line

wipe the print head with an up-and-down motion.

To change

appears

• The print head can be cleaned more easily if the

language

through the

optional print head cleaning cassette (TZe-CL3) is

setting.

printed label.

used.

BASIC USAGE

Entering Text

 Switching the character for entry[English/

Thai]

English

Thai

 Switching Upper Case/Lower Case

Upper case (

ON)

Lower case (

OFF)

Caps

 Making Two Lines Text

Move the cursor to where the second line starts and press

Use either 9mm or 12mm wide tape for two line text.

Display

Label image

 Entering Tab (

)

[Tab]

Printing Labels

 Preview

You can preview the text before printing.

• The print preview is a generated image of the label, and may

differ from the actual label when printed.

• When the LCD cannot display all the text at a time, press

to display the hidden text.

AC adapter jack

 Feeding (Tape Feed)

 Printing

[Copies: ]

• If you need only 1 copy of the label, press

selecting the number of copies.

• The number of copies can also be specified by pressing a

number key.

• To prevent damage to the tape, do not touch the cutter lever

while the message "Printing..." or "Feeding..." is displayed.

• To cut off the label, push in the tape cutter lever on the upper-

right corner of the machine.

• To remove the backing, fold the label lengthwise with the text

facing inward, to expose the inside edges of the backing.

Peel off the backing one piece at a time and apply.

• You can print up to 9 copies of each label.

 Using Print Options (

)

[Numbering]

You can print many copies of the same text while increasing a

selected number by 1 after each label is printed.

Example: To print copies of a label containing a serial number

(0123, 0124 and 0125)

[Numbering]

[Language]

[Thai/English]

• Select the highest number you wish to be printed when

setting the number.

You can also print Thai numbers the same as above by entering

Thai numbers.

[Mirror]

[Mirror Print?]

Saving Label Files

You can save up to 9 labels and recall them for printing at a later

date. A maximum of 80 characters can be saved per file, a

maximum total of 720 characters for the total memory. You can

Solution

also edit and overwrite the stored label.

 Save

[File]

• Refer to "Resetting the P-touch".

[Save]

 Print

• The batteries may be weak. Replace them.

[File]

• Check that the batteries are correctly inserted.

• A wrong adapter is used; the recommended adapter

[Print]

is the AD-24ES (Optional on the PT-D200).

• Check that the end of the tape feeds under the tape

[Copies: ]

guides.

 Open

• The cutter lever is used while printing. Do not touch

the cutter lever during printing.

[File]

[Open]

• Press

and select [Text&Format].

• You can also enter the File menu by pressing

NOTE

If you try to store a label when there is already a label stored to that

• Refer to "Initial Settings".

number, a message "Overwrite?" will appear. Press

save your new label. Press

to cancel.

USING TEMPLATES

Name Label (

This function allows you to create various name labels using the

To change tab length:

built-in templates.

[Tab Length]

Example:

[Auto/0-100 mm]

 Changing Label Length (

)

[Select Layout]

[Label Length]

[Auto/30-300 mm]

NOTE

[Print]

• After the label is printed, cut along the printed dots (:) with

scissors so that the label length matches the machine setting.

• If a specific label length has been selected,

also appears in

the LCD.

 To Clear

By pressing

, the letters will be deleted one by one.

To delete all text and settings :

[Text&Format]

NOTE

• Depending on the format you have selected, the entire

To delete text only :

contents of your text may not be printed. For example, if you

selected a fixed Label Length and the text is too long, an error

[Text Only]

message "Text Limit!" will appear.

• The templates cannot be edited.

• To clear all text, press

Press

to clear. Press

• When you access Decorative Mode or Name Label function,

your most recently printed Decorative Mode or Name Label

function text and label length will be recalled.

• Use clear tape in [Mirror], so the labels can be read correctly

• Press

to return to the previous step.

from the opposite side when attached on glass, windows or

other transparent surfaces.

• Only the highlighted symbols on the list below can be used in

Decorative Mode.

 Setting Margin (

)

USEFUL FUNCTION KEYS

[Margin]

[Full/Half/Narrow/Chain Print]

Font Key

[Full]/[Half]/[Narrow]

Press

For leaving equal margins on both sides of the text.

the text.

Half

Full

Narrow

ABC

25mm

12mm

4mm

[Chain Print]

Press

For creating a label containing text in various styles.

Enter text.

Size

without

Press

, then [Copies: ] appears.

Width

Press

or enter number with number keys

to select the number of copies.

Style

Press

. Printing will start, and then the message

"OK to Feed?" appears.

Press

to enter more text.

Clear the text, enter the text for the next label, and then

press

When the message "OK to Feed?" appears after the last

label is printed, press

After the tape is fed, press the cutter lever to cut off the

chain of labels.

NOTE

To cancel operations, press

• When [Chain Print] is set, feed the tape before using the cutter

otherwise a part of the text may be cut off. Also, cut along the

Frame Key

printed dots ( ) with scissors so the text is centered in the label.

• When [Half] or [Narrow] is set, displayed label length is the

Press

length from the printed dots ( ) to the end of the label.

LCD display

Label image

Full

ABC

63mm

Half

ABC

37mm

Narrow

ABC

21mm

• To print more than 1 copy of a label with minimum margin, set

the margin to [Narrow].

• Do not pull the tape since this may damage the tape cassette.

NOTE

• To cancel operations, press

• Frames cannot be printed on 3.5mm tape.

Symbol Key

Press

to select various symbols. Refer to the table of

Accessories

symbols below for a list of available symbols.

Tape Cassettes:

See the included "TAPE GUIDE".

AC Adapter:

AD-24ES (Optional on the PT-D200)

Cutter Unit:

TC-4 (replacement)

Choose a symbol

If the cutter blade becomes blunt after repetitive use and the tape

cannot be cut cleanly, replace with new cutter unit (stock no. TC-4) by

NOTE

obtaining from an authorized Brother reseller.

 Replacing the Cutter Unit

To cancel operations, press

Pull out the two sections of the cutter unit (green) in the

Punctuation

direction of the arrows shown in the illustration.

Business

Mathematics

Brackets

Install a new cutter unit. Push it in until it snaps into place.

Do not touch the cutter blade directly with your fingers.

Unit

Greek Letter

+ )

Decorative Mode

(Does not support Thai text.)

This function allows you to create unique labels by using built-in

templates.

Example:

[Select Layout]

[Name Label]

[Input Text]

ABCDEF

Bill Anderson

[Auto/30-200mm]

[Print]

ABC Company, Inc.

[Auto/30 -200mm]

• To exit the Decorative Mode or Name Label function and return

to the text input screen, do one of following:

a) Press

b) Press

to select [Cancel], and then press

and

, then "Clear?" appears.

when "Print" appears.

• These features are only available when using 12mm wide tape

to cancel.

cassettes.

• The maximum label length is 200mm for Decorative Mode and

Name Label function.

• When [Auto] is selected for "Label Length", the label will

automatically adjust to the correct length for printing the text

one time.

• Press

to return to the [Auto] setting for "Label

Length" mode.

Number

to select the settings to enter

Basic Shape

Select an item

to select the settings.

Large

Medium

Small

Electrical

Normal

× 2

× 1/2

Normal

Bold

Outline

Shadow

Solid

Italic

I+Bold

I+Outline

I+Shadow

Fun

Vertical (English only)

Family

Fashion

Vehicle

to select the frame design.

Select a frame

Sports

Hobby

Animal

Event

Food

[Basic/Pictograph]

Flower

Select category

Messaging

Signs

Audio/Visual

Arrows

Nature

Others