Brother P-Touch PT-D200 Руководство пользователя

Просмотреть онлайн или скачать pdf Руководство пользователя для Изготовитель этикеток Brother P-Touch PT-D200. Brother P-Touch PT-D200 2 страницы. Home and office labeler
Также для Brother P-Touch PT-D200: Руководство пользователя (1 страниц), Руководство пользователя (1 страниц), Руководство пользователя (1 страниц), Руководство пользователя (3 страниц), Характеристики (2 страниц)

Печатать страницу

Brother P-Touch PT-D200 Руководство пользователя

Safety Precautions

Indicates a potentially hazardous

WARNING

situation which, if not avoided,

could result in death or serious

injuries.

Follow these guidelines to avoid the risk of fire, burns, injury, electric

shocks, rupture, overheating, abnormal odours or smoke.

• Always use the specified voltage and the suggested AC adapter (AD-24ES/AD-

24ESA/AD-24ESAW/AD-24ESA-01/AD-24ESAW-01) for the label maker to prevent

any damage or failure.

• Do not touch the label maker during a lightning storm.

ELECTRONIC LABELING SYSTEM

• Do not use the label maker/AC adapter in places of high humidity such as bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly

bend or pull the power cord. Always hold the AC adapter when disconnecting from

the power outlet.

• Make sure that the plug is fully inserted to the power outlet. Do not use an outlet that

is loose.

User's Guide

• Do not allow the label maker/AC adapter/power plug/batteries to get wet, for

example, by handling them with wet hands or spilling beverages on to them.

• Since loss of eyesight may result when leaked fluid from batteries gets into your eyes,

immediately rinse your eyes with a large amount of clean water, and then seek

Thank you for purchasing Brother's PT-D200!

medical attention.

With your PT-D200, you can create labels for multiple

• Do not disassemble or modify the label maker/AC adapter/batteries.

• Do not allow a metal object to contact both the plus and minus ends of a battery.

applications. Select from the many frames, character

• Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.

sizes and styles to design beautiful custom labels. In

• Do not throw the batteries into fire or expose to heat.

addition, the variety of tape cartridges available allows

• Disconnect the AC adapter and remove batteries immediately and stop using the

label maker if you notice abnormal odor, heat, discoloration, deformation or

you to print labels with different widths and exciting

anything unusual while using or storing it.

colors.

• Do not use a damaged or leaking battery as the fluid may get on your hands.

For a complete list of tapes compatible with your label

• Do not use a deformed or leaking battery or one whose label is damaged. There is a

possibility of generating heat.

maker, visit us at: www.brother.com.

Please read this guide, including all Precautions, before

using this label maker. After reading this guide, keep it

in a safe place.

D0123M001

GETTING STARTED

Installing Power Supply and Tape Cassette

Head

Cassette

Cover

Tape

Cutter

Lever

With the LCD facing down, open the

When replacing batteries or tape

Cassette Cover by pressing the grooved tab

cassettes, make sure the power is

and pushing in the direction of the arrow, as

turned off.

illustrated.

This label maker requires six (6) AAA

If a tape cassette is already installed, remove it

alkaline batteries or six (6) fully charged

by pulling it straight up.

Ni-MH batteries, not included.

LCD and Keyboard

• Pressing the Preview key (21) displays a

1. Size

12. Power key

preview of the label, and may differ from the

2. Cursor

13. Menu key

actual label when printed.

3. Underline/Frame

14. Font key

• Label length shown on the LCD may differ

4. Width

15. Character key

slightly from the actual length when printed.

5. Style

16. Tab key

6. Caps

17. Caps key

7. Label Length

18. Shift key

Specifications

If a specific label length has

19. File key

been selected,

also

20. Print key

Dimensions:

Approx. 6.49" × 6.10" × 2.67"

appears.

21. Preview key

(W x D x H)

(Approx. 165(W) × 155(D) ×

8. Cursor key : Right (Use with

22. Frame key

68(H)mm)

Shift key to go to end of the

23. Symbol key

text.)

24. Deco Mode key

Weight:

Approx. 1.08 lb. (Approx. 490 g)

9. OK key

25. Backspace key

(without batteries and tape

10. Escape key

26. Enter key

cassette)

11. Cursor key : Left (Use with

27. Accent key

Power supply:

Six AAA alkaline batteries (LR03)

Shift key to go to top of the

28. Space key

Six AAA Ni-MH batteries (HR03)*

text.)

Optional AC adapter (AD-24ES/

AD-24ESA/AD-24ESAW/

NOTE

AD-24ESA-01/AD-24ESAW-01)

The LCD displays one row of 15 characters;

however, there is a maximum of 80 characters and

Tape cassette:

Brother TZe tape (width)

spaces for a text label, and 50 characters and

0.13" (3.5mm), 0.23" (6mm),

spaces if using templates.

0.35" (9mm), 0.47" (12mm)

• When selecting the settings, press

Visit us at support.brother.com/ for the latest

return to the default item.

information about the recommended batteries.

For FAQs, Troubleshooting, and manuals, visit:

support.brother.com.

• Do not place the label maker/batteries/AC adapter in direct sunlight or rain, near

Indicates a potentially hazardous

heaters or other hot appliances, in any location exposed to extremely high or low

CAUTION

situation which, if not avoided, may

temperatures (e.g., on the dashboard or in the back of your car) or high humidity, or

result in minor or moderate injuries.

in dusty locations.

• Do not apply excessive pressure to the cutter lever.

Follow these guidelines to avoid personal injury, liquid leakage,

• Do not try to print if the cassette is empty; it will damage the print head.

burns or heat.

• Do not pull the tape while printing or feeding; it will damage the tape and the label

maker.

• When the label maker is not being used, store it out of the reach of children. In

• Any data stored in memory will be lost due to failure or repair of the label maker, or if

addition, do not allow children to put the label maker parts or labels in their mouths.

the battery expires.

If any object has been swallowed, seek medical attention.

• The label maker is not equipped with a charging feature for rechargeable batteries.

• Do not touch metal parts around the print head immediately after printing.

• The printed text may differ from the text that appears in the LCD.

• Do not touch the cutter blade.

• The length of the printed label may differ from the displayed label length.

• If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with

• A protective clear plastic sticker it placed over the display during manufacturing and

clean water.

shipping. This sticker should be removed prior to use.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the

• When power is disconnected for more than three minutes, all text, format settings and

label maker.

any text files stored in the memory will be cleared.

• Do not use a battery other than that specified. Do not use combinations of old and

new batteries or combinations of different types, different charging levels, different

manufacturers or different models. Do not insert a battery with its plus and minus

Federal Communications Commission (FCC)

ends reversed.

Compliance Notice (For USA Only)

• Do not drop or hit the label maker/AC adapter.

• Do not press on the LCD display.

This equipment has been tested and found to comply with the limits for a Class

• Do not put your finger inside the label maker when you close the cassette cover.

B digital device, pursuant to Part 15 of the FCC Rules.

• Before using Ni-MH rechargeable batteries, carefully read the instructions for the

These limits are designed to provide reasonable protection against harmful

batteries and battery charger, and be sure to use them correctly.

interference in a residential installation. This equipment generates, uses, and

• When using Ni-MH rechargeable batteries, charge the batteries with a specialized

can radiate radio frequency energy and, if not installed and used in

battery charger before using the batteries.

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

General Precautions

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

• Depending on the location, material, and environmental conditions, the label may

interference by one or more of the following measures:

unpeel or become irremovable, the color of the label may change or be transferred

• Reorient or relocate the receiving antenna.

to other objects. Before applying the label, check the environmental conditions and

• Increase the separation between the equipment and receiver.

the material.

• Connect the equipment into an outlet on a circuit different from that to which

• Do not use the label maker in any way or for any purpose not described in this guide.

the receiver is connected.

Doing so may result in accidents or damage the label maker.

• Consult the dealer or an experienced radio/TV technician for help.

• Use only Brother TZe tapes with the label maker. Do not use tapes that do not have

Important

the

mark.

• Changes or modifications not expressly approved by Brother Industries,

Ltd. could void the user's authority to operate the equipment.

• Only use a soft, dry cloth to clean the labeler; never use alcohol or other organic

solvents.

• Use a soft wipe to clean the print head; never touch the print head.

• Do not put any foreign objects into the tape exit slot or AC adapter connector or

battery compartment, etc.

Tape

Cassette

End of

Cutter's

Tape

Toothed

Edge

Wheel

Tape Guide

Tape Exit Slot

Insert the Tape Cassette following the

Close the Cassette Cover and gently press

drawing marked inside the case. Gently

until it clicks into place.

press the Cassette into the label maker

NOTE

until it clicks into place.

If you prefer to use the optional AC Adapter

• Make sure your Tape Cassette is marked

instead of using batteries:

• Use only tape widths of 3.5 mm, 6 mm, 9 mm, or 12 mm.

Insert the Power Adapter cord into the AC

• If your TZe is packaged with protective plastic,

Adapter Jack on the side of the label maker.

be sure to remove the plastic before inserting

Insert the Power Adapter into a grounded AC

the tape cassette.

electrical outlet.

• Use only Brother TZe tapes with this machine.

When running a memory backup, we recommend

• Make sure that the End of the Tape feeds under

using both batteries AND the optional Power Adapter,

the Tape Guide.

in the event that one or the other power method fails.

Initial Settings

Accessories

Tape

See the included Supplies and

Turn your label maker on.

Cassettes:

Accessories Guide.

Supply power by using six AAA batteries or the

AC Adapter:

AD-24ES/AD-24ESA/

optional AC Adapter and then press

AD-24ESAW/AD-24ESA-01/

AD-24ESAW-01

Set the language.

Cutter Unit:

TC-4 (replacement)

The default setting is [English].

Over time, the Cutter Blade may become blunt

[Language]

from repetitive use. If the Cutter does not cut tape

[English/Español/

cleanly, replace the Cutter Unit. Contact your

local authorized Brother reseller and order item

Français/Hrvatski/Italiano/

TC-4, the Cutter Unit.

Magyar/Nederlands/Norsk/Polski/

Português/Portug. (BR)/Rom??/

Replacing the Cutter Unit

Slovenski/Slovenský/Suomi/

Remove the two sections of the Cutter Unit

(green) in the direction of the arrows as

Svenska/Türkçe/??ina/Dansk/

illustrated below.

Deutsch]

Set the unit of measurement.

The default setting is [inch].

[Unit]

[inch/mm]

NOTE

The label maker automatically turns off if no keys

are pressed within five minutes.

• To cancel any operation, press

Install a new Cutter Unit. Push it in gently until

• After pressing

, [Accepted] appears for

it snaps into place.

approximately one second.

WARNING

Do not touch the cutter blade directly with your

fingers.

BASIC USAGE

Entering Text

You can enter a maximum of 80 characters and

Entering Accented Characters

spaces for a text label, and 50 characters and

spaces if using templates.

To cancel any operation, press

• Refer to the Accented Characters table in this

guide.

Switching Upper Case/Lower Case

• The order of accented characters varies based

on the language you selected.

Upper case (

ON)Lower case (

OFF)

Changing Label Length

Caps

300 mm)]

Creating Two-Line Tapes

Move the cursor to where you want to start the

NOTE

After printing a label, cut along the printed dots (:)

next line and press

. Use either 0.35" (9mm)

with scissors so the label length matches what is

or 0.47" (12mm) tape for two-line printing.

shown on the LCD.

• The lock symbol

Line 1

Label image

specific label length.

• To return to the default length (automatic, based

Line 2

on text length), press

appears on the LCD.

Clearing Text and Settings

NOTE

To delete individual letters and spaces, press

• The return symbol ( ) appears when you press

the Enter key

To delete all text:

Entering Tabs

[Tab]

• You can also set a tab by pressing

To delete all text and settings :

• The tab symbol

appears when you insert a

tab in the text.

AC Adapter

Jack

Changing Tab Length

Cursor Keys

[Tab Length]

To move to the end of your text:

[Auto/0.0"-4.0" (0-100 mm)]

To move to the beginning of your text:

Printing Labels (cont)

Saving Label Files

You can save and reuse the text and settings for up

Setting Margins

to 20 different labels. Each label holds up to 80

characters (including spaces). Assign a number

[Margin]

(1-30) to each saved file so you can reuse it, and

[Full/Half/Narrow/Chain Print]

edit or overwrite stored files as needed.

• You can also enter the Margin menu by

pressing

Saving a new file

[Full] / [Half] / [Narrow]

(Enter text)

Use one of these options to customize margin

length before and after your text.

• The printed dots (:) indicate the end of the

label. Cut along the printed dots (:) with

Printing a saved file

scissors.

LCD

Printout

ABC

Full

2.7"

[Copies: ]

ABC

Opening a saved file

Half

1.6"

0.47"

ABC

Narrow

• You can also enter the File menu by pressing

1.0"

0.16"

NOTE

When saving a file, if you reuse a number that is

To print more than 1 copy of a label with

already assigned to another file, [Overwrite?]

minimum margin, set the margin to [Narrow].

appears on the LCD. To overwrite the previously

[Chain Print] (tape-saving option)

saved file, press

Use this option to print multiple different labels

press

with narrow margins. This option saves tape.

Enter your text.

Press

. [Copies:] appears on the LCD.

Press the number keys to enter the number

of copies you want of this text.

Press

to start printing.

When [OK to Feed?] appears on the LCD,

press

to change the text.

Clear the text, enter the text you want on

the next label, and then press

After your last label prints, when [OK to

Feed?] appears on the LCD, press

NOTE

• When you use [Chain Print], feed the tape

before using the cutter (

otherwise part of the text may be cut off.

• Do not pull the tape, as this may damage the Tape

Cassette.

Printing Labels

Preview

• Pressing the Preview key

displays a

preview of the label, and may differ from the

actual one when printed.

• If the LCD cannot display all the text at once,

press

to display the hidden text.

• Press

to exit Preview

[Label Length]

[Auto/1.2"-12.0" (30-

mode.

Feeding (Tape Feed)

• This function feeds approximately 1" (25mm)

of blank tape.

appears when you set a

• Do not pull the tape, as this may damage the

Tape Cassette.

, and [Auto]

Printing

[Copies: ]

• If you need only one copy of the label, press

after you press

• You can print up to nine copies of each label.

[Text Only]

• Press a number key to specify the number of

copies you wish to print.

• DO NOT touch the Tape Cutter Lever while the

message [Printing...] or [Feeding...]

[Text&Format]

appears on the LCD.

• When printing ends, push the Tape Cutter

Lever.

• To remove label backing, fold the label

lengthwise (with the text facing inward), to

expose the inside edges that run down the

center of the tape backing. Peel and apply.

USING TEMPLATES

Name Label

Use Name Label templates to polish the look of

your labels using one of our predesigned formats.

Refer to the Name Label Templates table in this

guide.

Ex:

[Name Label]

[Save]

(Select layout)

Enter text: Bill Anderson

[Print]

Enter text: ABC

Company, Inc.

[Auto/1.2" - 7.8" (30 -200mm)]

[Print]

NOTE

[Open]

• Depending on the format you have selected, the

entire contents of your text may not be printed.

For example, if you selected a fixed Label Length

and the text is too long, an error message [Text

Limit!] will appear.

• Templates cannot be edited.

• Only the highlighted symbols , shaded in the

Basic Symbols / Pictograph Symbols table in

this guide, can be used in Deco Mode.

• To clear all text, press

and

. To cancel without saving,

[Clear?] appears, press

to clear. Press

to cancel.

• When you access templates, your most recent

label created with a template opens

automatically.

• Press

to return to the previous step.

Using Print Options

[Numbering]

You can print a series of up to nine labels using

auto-numbering. Use this feature to

automatically increase a selected number by 1

after each one is printed.

Ex: Print copies of a label containing a serial

number (0123, 0124 and 0125)

(Enter numbers)

by moving the cursor to

the number you wish to increment using

[Numbering]

• Select the highest number you wish to print

when setting the number.

[Mirror]

Ex: To Mirror Print "J.SMITH", follow the

instructions below after entering

"J.SMITH".

(Enter text or characters)

[Mirror]

[Mirror

Print?]

• Use clear tape when using this function, so the

labels can be read correctly from the opposite

side when attached on glass, windows, or

other transparent surfaces.

Deco Mode

Use Deco Mode templates to add visual texture to

your labels. Refer to the Deco Mode Formats

table in this guide.

Ex:

[Select Layout]

[Input Text]

Enter text: ABCDEF

[Auto/

[Print]

1.2"-7.8"(30-200mm)]

• To exit a template and return to the text entry

screen, do one of following:

a)Press

b)Press

to select [Cancel], and

then press

when "Print" appears on the

LCD.

• Templates can be used ONLY with 0.47"(12mm)

tape cassettes.

• Maximum label length is 7.8" (200mm) when

. When

using templates.

• When [Auto] is selected for [Label Length],

the label will automatically adjust to the correct

length and print the text one time.

• Press

to return to the [Auto] setting for

[Label Length].