2N EasyGate Pro Быстрый старт - Страница 4

Просмотреть онлайн или скачать pdf Быстрый старт для Шлюз 2N EasyGate Pro. 2N EasyGate Pro 4 страницы. Umts gateway
Также для 2N EasyGate Pro: Быстрый старт (4 страниц), Быстрый старт (2 страниц), Быстрый старт (4 страниц)

2N EasyGate Pro Быстрый старт
• If the called subscriber is available, you
can hear the ringing tone. If not, you can
hear the busy tone or any of the GSM
provider's messages.
• When the called subscriber answers the
call, the call is established. The Line LED
is permanently on during the call.
• Hang up to terminate the call. The Line
LED goes off. If the called subscriber is
the first to hang up, you can hear the
busy tone and hang up.
Incoming call
• An incoming call is signaled by ringing.
The Line LED flashes during ringing.
• Hook off the phone to establish the call.
The Line LED is permanently on during
the call.
• For call termination see the Outgoing call
section.
Fax and modem connection
(fax models only)
EasyGate with fax converter has ability to
manage fax messages using analogue fax
Group 3 and data connection using analog
modem connected to telephone line. The
fax or data service must be registered with
your GSM operator.
• Outgoing FAX call or Data connection
Before
destination
*01* for fax call or *02* for data call.
When connected device generates calling
tone, this preset is not necessary.
In the GSM network, GPRS data transfer is suspended during voice calls
and do not continue until the voice call is finished.
EU Declaration of Conformity
Hereby, 2N TELEKOMUNIKACE a.s. declares that the radio equipment type 2N
compliance with directives 2014/53/EU and 2011/65/EU. The full text of the EU declaration of
conformity is available at the internet address www.2n.com.
© 2022, 2N TELEKOMUNIKACE a.s. – Prague, 1711v3.11
number
dial
code
• Incoming FAX call or data connection
It is recommended to activate separate
fax
number
on
multinumbering
messages and data connection should be
routed to appropriate number. If the fax
or data number is not activated, the call
from analogue network is not detected as
fax or data call and is routed via the
analogue channel of GSM network, the
connection can´t be established. In this
case it is possible to set fax engine in the
gateway to receive the next call as fax or
data
call
wiki.2n.com.
guaranteed by all operators.
Configuration over USB
• For
PC configuration of
necessary
to
Connect EasyGate to PC using USB cable.
• Virtual serial port(USB serial port FTDI) is
created immediately after linking PC and
EasyGate.
This
PCManager
to
EasyGate. When the port isn't activated
automatically use driver at www.2n.com.
• The COM port number of virtual serial
port has to be set in PCManager.
• USB
port
can
communication (CSD, GPRS) directly over
GSM module.
• Detailed description of configuration and
data communication is in the product
manual on wiki.2n.com.
your
SIM
scheme.
see
the
manual
This
function
EasyGate
install
PCManager UNI.
port
is
used
communicate
be
used
for
®
EasyGate is in
card
Fax
on
is
not
is
by
with
data