Fujitsu Primergy TX300 S4 Руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сервер Fujitsu Primergy TX300 S4. Fujitsu Primergy TX300 S4 8 страниц. Pre-attached rack conversion kit
Также для Fujitsu Primergy TX300 S4: Руководство по конфигурированию системы и информации о заказах (17 страниц), Установка (3 страниц), Указания по использованию (4 страниц)

Fujitsu Primergy TX300 S4 Руководство по эксплуатации
4
Conditions
When you selected pre-attached Rack Conversion kit, install a rack by referring to
"
Rack Conversion kit
n Required space
To settle this server, certain space is required as shown
below.
■ ��������������
��������������������
��������������������
■ ��������������
����������������������
5

Connecting peripheral devices

Connect peripheral devices, such as a keyboard and mouse, to the server in the following order.
��������������������������
�����������������
The power supply of this server is 100-240 VAC. Use a power cable that meets your country's standard.
For details, refer to the "User's Guide Appendix B.6 Power Cord Selection".
in PRIMERGY Startup Disc.
n Restriction of installation locations
To settle this server, avoid the following areas:
- Humid, dusty, or oily areas
- Humid, dusty, or oily areas
- Poorly ventilated areas
- Poorly ventilated areas
- Areas close to fire or other sources of heat
- Areas close to fire or other sources of heat
- Areas close to water
- Areas close to water
- Areas close to direct sunlight or near heating appliances
- Areas close to direct sunlight or near heating appliances
- Area with a temperature of below 10℃ or above 35℃
- Area with a temperature of below 10℃ or above 35℃
- Areas with humidity of less than 20% or more than 80%
- Areas with humidity of less than 20% or more than 80%
- Salty areas
- Salty areas
- Areas where corrosive gas is generated
- Areas where corrosive gas is generated
- Areas where cables become trip hazards
- Areas where cables become trip hazards
- Areas where strong magnetic fields are generated,
- Areas where strong magnetic fields are generated,
such as near TVs and speakers
such as near TVs and speakers
- Areas where the device is not stable and could tip over
- Areas where the device is not stable and could tip over
and hurt somebody
and hurt somebody
- In dusty areas, dust will stick to the front and backside of
the server for a short period of time. Since it causes fail-
ure, changing the installation place is recommended.
- This server may generate 39dB of noise as actual mea-
surement value when a Power Supply Conversion kit is
not installed. It may exceed 40dB when the conversion
kit is in use. It is recommended to place the server in a
dedicated room. When placing the server in an office,
take care of the environment against noise.
2
"
Installing a pre-attached
��������
�����
���������
�������
��������������������������