Fujitsu ETERNUS8000 800 Руководство по подключению - Страница 12

Просмотреть онлайн или скачать pdf Руководство по подключению для Хранение Fujitsu ETERNUS8000 800. Fujitsu ETERNUS8000 800 19 страниц. Disk storage systems (fibre channel) for oracle solaris
Также для Fujitsu ETERNUS8000 800: Руководство (28 страниц), Руководство (21 страниц), Руководство по подключению сервера (25 страниц), Руководство по подключению сервера (32 страниц)

Chapter 3 Setting Up the Server

3.2 Setting Up Brocade Fibre Channel Cards

3.2

Setting Up Brocade Fibre Channel Cards

Brocade Command line Utility (BCU) is bundled with the Brocade Fibre Channel card driver.

Use the "bcu" command to check the port ID and to set the port speed, topology, and frame data

size.

•

Port ID

Use the information obtained in

Server" (page 9)

Port ID check command

bcu port -- list

•

Port speed

Specify the port speed value according to the table below.

"bcu" command format

bcu port --speed <port_id> [ 1|2|4|8|10|auto]

8Gbps

4Gbps

•

Topology

Set the topology value to "p2p".

"bcu" command format

bcu port --topology <port_id> [auto | p2p]

•

Frame data size

Set the frame data size value to "2048".

"bcu" command format

bcu port --dfsize <port_id> [<dfsize>]

P3AM-4562-01ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

to check the port ID.

Fibre Channel switch transfer speed

Fibre Channel card

transfer speed

8Gbps

"3.1 Creating a WWN Instance Management Table for the

4Gbps

2Gbps