Fujitsu ETERNUS8000 800 Руководство по подключению - Страница 14
Просмотреть онлайн или скачать pdf Руководство по подключению для Хранение Fujitsu ETERNUS8000 800. Fujitsu ETERNUS8000 800 19 страниц. Disk storage systems (fibre channel) for oracle solaris
Также для Fujitsu ETERNUS8000 800: Руководство (28 страниц), Руководство (21 страниц), Руководство по подключению сервера (25 страниц), Руководство по подключению сервера (32 страниц)
Chapter 3 Setting Up the Server
>
3.3 Setting the Configuration File (/etc/system)
To set multiple ports, repeat the above procedure for each port.
3.3
Setting the Configuration File (/etc/system)
Procedure
1
2
3
4
P3AM-4562-01ENZ0
ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
•
Frame data size confirmation
# bcu port --dfsize 1/0
Port maximum receive data field size is 2048 -
Edit the configuration file.
Edit the configuration file (/etc/system) and specify the command queue depth.
The appropriate "ssd_max_throttle" parameter value is determined by the ETERNUS Disk
storage system model, as follows:
ETERNUS Disk storage system
ETERNUS2000
ETERNUS4000
ETERNUS8000
Specify the command queue depth for the "ssd_max_throttle" parameter.
Add the "ssd_max_throttle" parameter if it does not exist.
Example
set ssd:ssd_max_throttle = 20
After editing the configuration file, save it.
After the setting is complete, check the configuration file for incorrect settings.
Reboot the server.
# /usr/sbin/shutdown -y -g0 -i6
Command queue depth setting
8
20
20
14
End of procedure
End of procedure
Copyright 2010 FUJITSU LIMITED